iPhone XS No Service Issue? Here’s the fix

“No Service” issue is the biggest issue on iPhone XS. Many Apple users have this issue on their iPhone. They said that their iPhone keeps on searching for service. Here I am going to tell you the solutions to fix iPhone XS no service issue.
Solution 1: Check the area

1. Make sure that you are within the area where you can receive a good cellular service.
2. Try different places. Because this may be a network issue.

Solution 2: Force Restart

1. Press the Volume Up Button and quickly release it.
2. Press the Volume Down Button and quickly release it.
3. Press and hold the Side Button until the Apple Logo appears.Solution 3: Refresh Airplane Mode
4. Launch Settings.
5. Turn on “Airplane Mode”.
6. Wait for 1-2 minutes and then turn it off.

Solution 4: Enable “Cellular Data” and “Data Roaming”

1. Launch Settings->Cellular Data.
2. Turn on “Cellular Data”.
3. Tap “Cellular Data Options”.
4. Enable “Data Roaming”.

Solution 5: Update Carrier Settings

1. Connect your iPhone to Wi-Fi/Cellular Data.
2. Open Settings->General->About.
3. Wait for 15-20 seconds.
4. Tap “Update” in the pop-up box if update is available.

Solution 6: Remove and reinsert the SIM

1. Take the SIM out of your iPhone.
2. Wait for few minutes and then put the SIM back in.

Solution 7: Reset Network Settings

1. Go to Settings->General->Reset.
2. Tap “Reset Network Settings”.
3. Enter the Passcode if required.
4. Tap “Reset Network Settings” in the pop-up box.
5. Wait until your iPhone restarts and then connect it to Wi-Fi.

Note: This action will reset all Wi-Fi Networks & Passwords, APN & VPN Settings, and Cellular Settings of your iPhone.
Solution 8: Check for Software Update

1. Connect your iPhone to Wi-Fi.
2. Launch Settings->General->Software Update.
3. Tap “Download and Install” if update is available.

Solution 9: Reset All Settings

1. Go to Settings->General->Reset.
2. Tap “Reset All Settings”.
3. Enter your passcode and restrictions passcode.
4. Tap “Reset All Settings” in the pop-up box.
5. Again tap “Reset All Settings” to confirm.

Note: Reset All Settings will remove all Bluetooth pairing details, saved Wi-Fi Networks & Passwords, and APN & VPN Settings.
Solution 10: Factory Reset
Before doing it back up your iPhone. Because this action will erase all data from your device.
To back up your iPhone,

1. Connect your iPhone to Wi-Fi/Cellular Data.
2. Open Settings.
3. Tap your Apple ID banner.
4. Tap “iCloud”.
5. Scroll down to find “iCloud Backup” and tap it.
6. Enable “iCloud Backup”.
7. Tap “Back Up Now”. Wait until the process is finished.

To Factory Reset your iPhone,

1. Open Settings->General->Reset.
2. Tap “Erase All Content and Settings”.
3. Enter your Passcode if required.
4. Tap “Erase iPhone” in the pop-up box.
5. Again tap “Erase iPhone” to confirm.
6. Wait until your iPhone restarts and then set up your iPhone as new.

If you know any other solutions to fix this issue, let us know through your comments.