iOS 12 Call Volume Low? Here's the fix


I am an iPhone User. Recently I had stucked into a problem that after upgrading to iOS 12, I couldn’t hear Sound on my phone calls. Because of this serious issue, I had missed my important official calls and even I couldn’t hear the sound of the person from the other end. Somehow, I had fixed this issue with the help of tricks suggested by my friend Jerrick. Here, I gonna share those tricks with you so that you can also make use of it.
Fix 1: Remove iPhone Case
Sometimes, the case of your iPhone may block the rear microphone so that the sound quality of your device will be poorer. What you have to do is… just remove the iPhone case cover and check whether that your microphone is not damaged.
Fix 2: Turn Off Bluetooth
Go to Settings -> Bluetooth and then turn it off.
Fix 3: Turn Off Noise Cancellation Mode

  1. Launch Settings -> General.
  2. Tap Accessibility -> Phone Noise Cancellation
  3. Turn Off Phone Noise Cancellation Mode.

Fix 4: Force Restart/Hard Reset (iPhone 8, 8 Plus and iPhone X)

  1. Press Volume Up button and quickly release it.
  2. Then press Volume Down button and quickly release it.
  3. At last, press and hold the Side button (Wake/Sleep button) until the Apple logo appears.

Note: Don’t press Volume Up button and Volume Down button at the same time.
Fix 5: Clean the Debris

  1. Make sure that the Microphone/lightning port on your device is not covered with any debris or dirt.
  2. If there is any, then just clean it out with a gentle brush smoothly.

Fix 6: Force close your Apps

  1. Firstly, double-click the Home Button.
  2. You will see your most recently used Apps.
  3. Just swipe up the app’s preview to close the app.

Fix 7: Reset All Settings

  1. Go to Settings->General->Reset.
  2. Tap “Reset All Settings”.
  3. Enter passcode if required and then tap “Reset All Settings” in the pop-up box.

Note: When you Reset All Settings, your iPhone will remove all Bluetooth pairing details, saved Wi-Fi Networks & passwords,  and APN & VPN settings.
Fix 8: Factory Reset

  1. Open Settings->General->Reset.
  2. Select “Erase All Contents and Settings”. Enter passcode if it is required.
  3. Then you will be asked to enter Apple ID password. Enter it. The reset process will take 1 or 2 minutes.
  4. Now turn on your device.
  5. You can see the Apps & Data screen with four options. Tap “Restore from iCloud Backup”.
  6. Sign in to iCloud. To do that you have to enter Apple ID & Password. Then tap “Next” at the right upper corner of the screen.
  7. Then tap “Agree” to agree to the Terms and Conditions.
  8. The latest list of Backup for your iPhone will appear. Tap it. Restore will start.

Note: This process will remove all your data from your device. Therefore, it is advisable to take backup of all your data.
Fix 9: Check for Software Update
Make sure that you are using the latest version of iOS on your device

  1. Go to Settings->General->Software Update.
  2. Tap “Download and Install” if an update is available.

Other Solutions:

  • Make sure that the Ringer switch on your device is not set to mute or silent.
  • Make sure that the Do Not Disturb feature on your device is turned Off.
  • If your device is under Warranty Status, then contact Apple Store for further help.
  • Check the volume level of your iPhone Settings.
  • Make sure to uninstall the third-party apps.

Hope any one of the above fixes will be helpful to you. If you find this article as useful or if you know any other solution to fix this issue then kindly share your experience with me through your comments below. Thank You…

10:30 am

Leave a Reply