Actually I found out by accident that a Series 3 can pair and sync Apple account with iOS26 ... see 256345656
Click here and see the section about your issue; the one about Media and Purchases covers cases where the error message refers to the App Store and iTunes or says that you can't login because your account has been locked. If it isn't any of those listed, describe it.The people on these boards are mostly other customers, not Apple Support.(265502)
Re: Passwords app stopped working correctly for one siteSorry no-one has replied to your post until now. Am no expert in this area myself, yet your post to us deserves some response.I have encountered some sites where security is so tight that the site itself does not allow passwords to autofill. (Much better, is the use of verification codes sent to a phone or e-address after sign-in details are entered.)There is another discussion thread on a similar situation online (link below): Seems there could be interference from an installed third-party passwords app on the Mac, or from a process in place from the website's developer: Apple Passwords not autofilling for one s… - Apple Community
The notes in the "On my iPhone" location are stored only on your iPhone, not in iCloud. Removing the app also removes those notes. The only way to recover your notes is to restore a backup made before the notes disappeared. (The notes in the "On my iPhone" location are part of a backup, contrary to notes stored in iCloud.)
Thanks. I haven't run a VPN in years but there is a disabled config in Settings/VPN. Will delete and reboot.
You are not addressing Apple here. This is a user-to-user site. We are all users here.....just like you. Apple is not here. They will not see your post or reply.After all, you signed the Terms of Use Agreement for this site to confirm that you understood these basic facts.If you want to provide feedback to Apple, you can use this link:Feedback - iPhone - Apple
I usually don't mix Track Automation with Region Automation, I use either Track or Region Automation. That's why I don't have any "priority" issues.Your second issue may happen because of the used automation mode. When set to "Touch", the automation slaps back to the default value, unlike "Latch" (or "Write").
Take it up with your government. Apple has to comply with the law.
Sorry this MMS/RCS is your phone carrier feature not Apple. Escalate the issue with them, your line need to be provisioned by them to use their feature.
Is there away to find out the model as im unsure and hes unsure sorry it is an older one id think maybe 6/7 years old Does starting the imac in recovery mean its comes up with the 4 choices with the bottom one being disk utility? When i try and reinstall the macOS its says High Sierra and then when i say continue its says “the recovery server could not be contacted” im very sorry but incase you havent noticed im useless with all this, thanks for any help though
Now I understand . It was opening in Pages and so I was saving it as that. All sorted thanks
What I posted is after doing all the steps you provided. Thus my sharing w/ consumers who recently purchased one of the newer watches recently. We purchased a brand-spanking new Titanium watch (GPS + Cellular) for hubby in July 2026 after seeing all of the features of my watch. I purchased my own earlier in the year. The selling point for all of us, again, was the Walkie-Talkie option for our family, because the phone signal is NOT very reliable, and takes too long to make the cellular connection via mobile or watch. For volunteers in this community, FaceTime is/was NOT included w/ our standalone GPS/cellular setup, leaving us w/ just a Phone app. That is the issue here.Husband uses his iPhone at home, prefers the watch w/ health (walking/running), and Walkie-Talkie when outside, and in our area the Walkie-Talkie app VERY, VERY reliable w/ our family members. Zero issues, except when there's a complete network outage, which is rare.This is not a software issue, but a functionality issue. If it's a software issue, then as stated in another reply, Apple can remove phone, messages, mail, etc., leaving consumer w/ just a device to display the time, versus the product we actually purchased.
I would help if you can ask creative.space this question:"Can you confirm that our particular creative.space server, including its current firmware/software version and SMB share configuration, meets Apple's requirements in Support Article 101919 for storing active Final Cut Pro libraries -- specifically Samba 4.3.4 or later with the catia, fruit, and streams_xattr VFS modules enabled?"
We are having the same issue on our LMS using Articulate Rise content with subtitles enabled shows nothing but a blank white space where the video is supposed to load. But its not happening to everyone, we are trying to identify what is different about those devices (all on iOS 27.0.1) that are having trouble while others are not, there must be a setting possibly? So we may just have to remove the subtitles altogether and republish the whole course.
Hello~ First finding the reason and enabling your account…see the link below by clicking on and reviewing the information there…If your Apple Account is locked, not active, or disabled - Apple SupportNote… once inside the link above you may tap on other highlighted tabs of interest for further information. Also…Contact Apple Support - Apple Support~Katana-San~
Hello ~If you are trying to zero your balance before changing regions…you may purchase an item from the App Store for more than your balance and the remainder will be billed to your credit card on file thus zeroing your balance . You may also go to lower left hand corner and click on Support and they can zero it for you or…Contact Apple for support and serviceAlso if you are changing regions take a look through this article as well…Change your Apple ID country or region - Apple Support~Katana-San~
I have the exact same problems with my 15 pro max. I tried the "Reset notification settings" in the Whatsapp app, my profile, Notifications, scroll all the way to the bottom and click reset notification settings (in red), and after restart the iphone, and it's back to normal now.
The description said "bug fix".
Go to Settings > Siri > Listen for Siri, and turn it off. Then turn it back on to either Siri or Hey Siri for the activation and you should be given the steps to retrain your voice.
I have spent (wasted?) the whole day creating Motion templates, going into Motion and doing the blur there and even retiming to 101% and adding Optical Flow. I have used all manner of sample rates and shutter angles.Nothing has worked . . . at least not without adding ghost images. At one point Optical Flow seemed to create a silky smooth motion but I was not able to replicate it and I have trashed the apparently working version so I can't be certain whether or not it was just a dream.At least I can do it in DVR Studio extremely simply and quickly so I will use that as my go-to remedy.Actually I have seen so many shutter jitters I now almost like them.
So, you reached out again (since I posted)? If not do so. You can also try reaching out to the vendor.
I’ve turned my phone off and back on and it still wont work. I can’t copy any text from any photos.
Im having trouble finding my airpod pro's. Mine says they are out on the driveway somewhere but they are not on the driveway. I looked under the vehicles near the area it says. The accuracy is just bunk. I have lost both the case and pods together and it won't make a sound and I know they are charged. The location my phone says is always the same but I don't think it is the real location. I think it is the last known location before they went missing. I can get my phone to be nearly on top of the spot it says the pods are in but then it will reset and be just a bit away then I can move it back to the same spot but there are no buds. I wanted to report them missing but it won't let me and yes, they are mine and registered to me. Not sure why I can't report them missing just in case someone else finds them and tries to use them.
Also after i turn off it completly for 10mins + the camera sudentlly works ok for about minute before it starts shakes again I will it turn off now for whole night maybe it will be gone by tomorrow morning
There are quite a few text-to-speech applications. Any one of them will take a block of text and turn it into an audio stream.https://share.google/FkPDCGTpLnxs1bNbRSo save your transcript for each file, run it through the TTS and save it as an audio file.Then, in Keynote, you can add the relevant audio clip to each slide via Insert -> Choose File...Use the Inspector to set the audio clip to start automatically.Now you can run your presentation and the TTS audio will play for each slide.
Hi,Intermittent disk space loss on macOS Sequoia 15.8.2 is typically caused by background system subsystems that create temporary files, caches, or snapshots, and fail to purge them immediately. In macOS Sequoia, Apple reclassified many hidden files into the System Data category, which can balloon and shrink randomly.The primary culprits behind this issue on your iMac include:1. APFS Local Time Machine SnapshotsEven if your external Time Machine drive is disconnected, macOS takes hourly background filesystem snapshots. If you recently deleted large files or apps, APFS preserves those data blocks in a hidden local snapshot until it expires (usually after 24 hours) or until disk pressure forces a purge.The Fix: Connect your Time Machine backup drive and let a backup cycle complete to clear old snapshots. Alternatively, open Terminal and force-thin them by typing:sudo tmutil thinlocalsnapshots / 10000000000 4(This requests the system to immediately purge up to 10 GB of local snapshots with urgent priority).
2. The mediaanalysisd and idleassetsd Caching LoopsA known issue in macOS Sequoia involves background processes like com.apple.mediaanalysisd (which scans photos/videos for faces and objects) and idleassetsd (which downloads dynamic wallpapers and screensavers). These processes can loop, rapidly writing gigabytes of data to your drive, then clearing them later.The Fix: Go to System Settings > Wallpapers and switch your background to a static, pre-installed Apple wallpaper rather than a dynamic aerial video. To wipe out a bloated media analysis cache, clear the contents of ~/Library/Caches/com.apple.mediaanalysisd/.
3. Spotlight Knowledge Events & Mail IndexingUpgrades to Sequoia can cause the CoreSpotlight indexing daemon to aggressively journal Mail and Messages data. The folder ~/Library/Metadata/SpotlightKnowledgeEvents can unexpectedly bloat to dozens of gigabytes.The Fix: If you notice your iMac getting warm or your space disappearing while Mail is open, go to System Settings > Siri & Spotlight, scroll down to the Search Results list, and temporarily uncheck Mail and Messages.
4. Overburdened Purgeable Storage (The "Disk Pressure" Trick)macOS retains gigabytes of data as "Purgeable Space," promising to delete it when you run low. However, the OS often waits until the very last second, causing "Disk Full" errors before triggering its cleanup routine.The Fix: You can trick macOS into releasing this space instantly. Open Terminal and run:dd if=/dev/zero of=~/purge_dummy_file bs=100mLet it run for a minute until a "Disk Almost Full" warning pops up. This triggers macOS to purge all non-essential caches. Once the alert shows up, press Control + C in Terminal to stop it, then run:rm ~/purge_dummy_file
5. Clear Caches via Safe ModeIf the loss is erratic, a corrupted system cache file might be the anchor.The Fix: Shut down your iMac. If it is an Intel-based iMac, turn it on and immediately hold the Shift key. If it is an Apple Silicon iMac (M1/M2/M3), press and hold the power button until you see the startup options screen, select your disk, hold Shift, and click "Continue in Safe Mode."Let the Mac sit for 5 minutes in Safe Mode (which runs automatic directory checks and purges system caches), then restart normally.
Yes there is a fix in 27.
2. Enable Lock Controls . - this disables you using the touch and prevents random music starting up. I’ve successfully been using this new setting for a week and it’s worked like a charm
Start here: Screen and block calls on iPhone - Apple SupportIn addition, reach out to your cellular provider to see what is available. As Bob states, blocking contacts is a waste of time, unless you know the contact and have confirmed the contact point.
You can go to System Settings ➜ Siri ➜ scroll all the way to the bottom, and Turn Off Siri AI if you don't want the Siri Ai powered search. Beyond that there's more options you can continue to restrict Siri AI further.click here ➜ Turn off Apple Intelligence in macOS 27 - Apple Community
You say you have been refunded but it has not yet appeared in your account. This support article explains how to check the status of a refund for apps or media content that you bought from Apple, and how long it takes to receive a refund if you are granted one --> Check the status of a refund for apps or content that you bought from Apple - Apple Support After you request a refund you'll receive a status update by email within 48 hours. IF your refund is approved (with a few exceptions Apple does not automatically grant refunds), the funds are applied to the same payment method that you used to buy the item. How long it takes for a refund to appear on your account or statement depends upon the payment method used: ● Store credit—It might take up to 48 hours to see the refund in your Apple Account balance. ● Mobile phone billing—It might take up to 60 days for the statement to show the refund. Processing time might be affected by your carrier. You can contact your carrier for an update. ● Credit and debit cards, Apple Pay, Apple Cash, and all other payment methods—It might take up to 30 days for the statement to show the refund. If you don't see the refund after 30 days, contact your financial institution." Where it refers to seeing your money taking many days, the article specifically says "statements”. To me a statement is something that I only get once per month. I know with my cards I can also check online and charges and refunds usually really appear in a day or so.For apps and media you can also sign into https://reportaproblem.apple.com to check if the status of your item is "Refunded".If you need to contact Apple about this, click on this link --> https://getsupport.apple.com/?PGF=PGF63006&category_id=SC0060&symptom_id=23390 If that one does not work, try: Contact Apple Support - Apple Support and go to the bottom to see if there’s a phone or chat option. The people responding on this forum are users like yourself and can’t do anything more than advise you.This is not mentioned in the documentation but others have posted here that if Apple cannot find the method that was used to make the payment, they might send the funds to your bank which is then responsible for getting them transferred to your new card*. Another possibility is Apple will issue a credit balance to your Apple Account instead.
* Refund question regarding blocked card - Apple Community
Seriously, if you can post here, you can do an internet search for instructions. What I think is easy to understand may well be different than what you find easy. You can certainly start at "technogically inept" (we all did) but you've been around here long enough that you've learned some things. Here are Apple's instructions:Take a screenshot on Mac - Apple SupportSee also the instructions at the bottom of this user tip:Writing an effective Apple Support Commun… - Apple CommunityI've never played poker.
How to download Apple support
yeah sure I'll totally do all that and not blame this new OS which clearly is the problem. Also why do I have to click on files like five times before they open? Also why does my OS keep jumping me from program to program or freezing up entirely or not letting me enter a password when it is demanding a password? Oh it's because it takes 17 minutes to open a single file in Preview, Adobe, Microsoft, and anywhere else I might want to open a file. That's right.
hello again! so i did use another mac as the middle man in this process. it created a music library on my external hard drive and contained all my metadata! success! thank you for the tip!but now when i have a new issue. i choose that new file on my new mac desktop when i option-click. it opens but none of of the music shows up in the library. i’m not sure what’s going on here. please help. thank you in advance.
Thanks, I tried all these steps and it nothing work, I've read online that apple have stopped their servers for Catalina 10.15.
8. This could be the issue.
FYI, you are entitled to compensation as the product you purchased, especially in the past few months, is not the same, and has been lessened. Apple has discontinued the product. Legally, since it's no longer the product that you purchased, you are entitled to a full refund of the product, even beyond the 14-day period. This is a major feature, and a safety and security feature that families use for guaranteed connections. This was also the selling point for purchasing the Apple Watch, therefore, all that my husband has now is a second iPhone while no longer being able to contact me via Walkie-Talkie.
Apple also gave no warning that updating to os27 would remove the Walkie-Talkie feature (negligence) and has not provided an alternative for the Walkie-Talkie feature.
https://discussions.apple.com/thread/256364934?answerId=262201317022&sortBy=rank#262201317022
Movies are heavy-duty use. They demand a lot from the device's CPU and GPU. The processes of decompressing and decoding video files also creates a lot of heat.
Do you know what the Migration Assistant app is and what it does? Read the instructions provided in the link below.Transfer to a new Mac with Migration Assistant
If you see the message below, or similar "inactive" messages: - "Inactive" Apple ID/Account - "Verification Failed. This Apple Account is not active." and you see an alert with a Request Access button, you might be able to request access to your account by tapping Request Access. If that does not work, this link —> https://getsupport.apple.com/?PGF=PGF63005&category_id=SC0245&symptom_id=23626 is the most direct way to get to the people helping you with this. You can also try by telephone at one of the numbers in this support article --> https://support.apple.com/HT201232 If neither of those work for you, see if you can reach any live support at Apple using https://support.apple.com/contact If you deactivated your account click on this link about 'How to deactivate your Apple ID account' --> https://support.apple.com/HT208503 and see the section about "Can I reactivate my account?"
Haven't you created a backup before updating? If not...Create a backup.trash Logic 13Sign into the AppStore and look for purchased apps. Sometimes you have to manually trigger the download by going into the store as if you were going to buy Logic. You don't need to buy it again.
there is some customization under view settings but very limited since it has been rolled out using "all new liquid glass design" and would have to agree. maybe next release themes would be included.
I have the exact same problem on a 2019 Intel iMac running FCPX 12.3The clips have been analysed and rendered but still play very choppy (export is the same), a problem I didn't have before.Deleting the render files, the analysis files and Final Cut Pro preferences didn't change anything.I tried to apply the optical flow to different kind of codecs and video files, the results remained the same.And I have plenty of space on my drive.It's all very frustrating, because it used to work perfectly…
How large is your internal disk which you are trying to backup? That 500GB disk is too small for any backup.Use a storage device with at least twice the storage capacity of your Mac. For example, if your Mac has 1TB of storage, your backup disk should ideally have at least 2TB of storage. If Time Machine needs more storage space, your Mac will let you know.
Yes I have and that hasn't helped. Maybe I'll just keep getting paper statements until Chase takes over.
I have played around with the settings to no avail. I think the problem with the "Known AirDrop Contacts" is that I have never been able to confirm the code on the MacBook so the MacBook cannot show up as a "Known" contact. Thanks for the idea, though.
Importing last year's tax data has never been as straightforward as it should be with TurboTax desktop.The main problem is it doesn't show last year's file, even when it's right in the same folder you would do a Save, Save As to.Below the empty list, click the small blue link, "Find your tax return". A standard Finder window will open where you can choose last year's return. You'll get this box.Rather obviously, click the Transfer button to import the data.And almost stupidly, if you start another new return, then it will show you the return you chose before.Make that make sense, Intuit.
Are you using the Online TurboTax version?
Thank you den.thed for the added Good Points. 👍
As noted, there are serious concerns give the history of Fusion Drives and the age of your iMac. There is no real difference in performance between running Catalina and Monterey. The biggest problem this late in the game, is that the added stress of upgrading could cause a week or marginal drive to fail. Either way, it is imperative that you have good backups in place. While using Time Machine on an external HDD or SSD can save your bacon. I also suggest using cloning software like CarbonCopyCloner or SuperDuper on a second external SSD. https://bombich.com/ https://www.shirt-pocket.com/The other saving factor that is available for an aging iMac with a Fusion Drive, is the ability to startup and run from an external SSD. https://discussions.apple.com/docs/DOC-250003583
Mine did this too, updated last night and now no calendar events! All gone!
If this were the problem, what would be the most suitable solution?
Hi therePlease try this Instead of using Type-to-Jump, use the built-in library filter to instantly narrow down your entire album wall as you type.Press Cmd + F to open the search utility.Make sure you select the Library tab (instead of Apple Music).As you type your keywords, the UI will filter out non-matching results dynamically, giving you the clean, scannable layout you need for large collections.
Well it looks like I need to check with my carrier.
Try turning off force click and haptic feedback in the trackpad settings. This fixes it for me.
So your phone carrier can't help you with MMS which is their feature, is what you're saying?
On my Mac (running Golden Gate 27.2), I can switch among Both Libraries, Shared Library, and Personal Libraries even when I am viewing an Album. It just may show an empty page for Shared or Personal if all the items in the Album are in the other Library.It does work somewhat differently on my iPhone (running iOS 27.2), in that I have to be at the top level of Collections to switch among Both Libraries, Shared Library, and Personal Libraries rather than inside a specific Album, but I don't have to switch over to the Library view.On my iPad (iPadOS 27.2), only Collections mode allows you to change among Both Libraries, Shared Library, and Personal Libraries. I have no idea why the three programs handle it so differently.
People complain of bugs in every operating system but as the overwhelming number of users do not experience these it points to the fact that there must be some peculiarity or fault in the Macs of those who appear to experience them.Rather than throwing the baby out with the bath water, it is more useful to troubleshoot your Mac to discover what is causing your specific problems as in most cases it is unlikely to be the macOS.I find Gemini AI can be very useful at troubleshooting though you can get a few false starts, so you need to be patient and interrogate it if you don't get the right answer first time.
I have now reported it to Apple. Not sure if it's a bug tho. If many with tap-to-click enabled on a trackpad were inadvertently renaming instead of opening files, (slow double-click) this could be how to fix that. Tap-pause-click still works, and editing in icon mode works since most would double-click the icon to open it, not the name.
If you are not experiencing the same problem on the an iPhone SE3 pls dont write us off as not knowing what we are talking about.
Personally I find your replies insisting its not an iOS issue and to check Focus rather offensive.
Focus is switched OFF by default for your information.
You have plenty of people here with exactly the same issue.
Its obviously an iOS 27 issue.
It is very rare for him to ever return to threads so he wont see it. Ignore the boilerplate responses, it IS a bug. We have reported it, nothing else to be done. REMEMBERturn the silent switch to red then to off to turn off silent. Unless your phone is a spare there is NO reason ever to turn it off so it is a minor bug. Just put the phone on charge every night all night and don't turn it off.
Your response is coming from a techie that has huge knowledge of knowing your way around Apple devices at Level 10... However, you're not seeing it from my perspective as a daily Apple device user on Level 1, 22 points. I went into Sys Svces and turned off any and all AI toggles. It was labor-intensive. Then you responded. Yesterday, I received an email from the Apple Support Community, saying that I had 5 "helpfuls" and was seen by 287 other people - and that Wonderful News - tells me others are looking for help as well and tired of fiddling their way to find answers.
Yeah, same here. And the annoying part is I was away and exchanged about a dozen contacts with people on a trip in Japan and now I've got to import them in to my macOS contacts app. Way I know to do that is to export them from icloud.com, but that doesn't export the pictures so that I don't have photos. This is really annoying. They need to fix this. I haven't had a contact issue like this in about a 10 years
Looks like 27.2 left this one alone too. Until Apple fixes it, select the songs and Control-click > Add to Playlist, which adds one copy each, and a playlist that already doubled up is quickest to delete and rebuild that way (deleting a playlist leaves the songs in your library).If you'd rather not wait on Apple, Katalog https://musickatalog.com/ runs alongside Music on the same library: adding songs to a playlist adds each one once, and you can shift-click across albums and edit them all in one Get Info window where Return saves instead of playing.
Seems like this is this going on, I can't pair via XCode and/or Paired Devices. Anyone have any tips or tricks not sure if Apple cares about this process.
Lockdown Mode probably was not the root cause of the macOS 27.2 update failureThe fact that macOS 27.2 installed successfully after Lockdown Mode was disabled is significant, but it does not , by itself, prove that Lockdown Mode was the root cause.Apple's Lockdown Mode documentation describes specific restrictions, including:Wireless connectivity: Devices won't automatically join non-secure Wi-Fi networks and will disconnect from a non-secure Wi-Fi network when Lockdown Mode is enabled.Cellular connectivity: 2G and 3G support is disabled on iPhone and iPad.Apple also documents restrictions involving device connections and configuration profiles. However, it does not identify macOS software-update personalization as a restricted function or Lockdown Mode as a known cause of update failures.In this case, the key clue is the error “Failed to personalize the software update,” which Apple addresses in its macOS installation troubleshooting guide.The update repeatedly failed and rolled back to macOS 27.0.1, even after attempts using Safe Mode, Recovery, and DFU Revive.Apple's troubleshooting guidance explains that personalization errors can have several causes, including temporary issues. It recommends checking the internet connection, installing from macOS Recovery, repairing the startup disk, and, in rare cases, reviving or restoring firmware. None of these recommendations identifies Lockdown Mode as the cause.The error points to a failed update process, but it does not establish exactly where or why the failure occurred.Could Lockdown Mode have contributed indirectly? Possibly. Its documented restrictions affect certain connectivity and system features, so an indirect interaction cannot be ruled out. However, there is no evidence here demonstrating such a mechanism. It's also possible that disabling Lockdown Mode coincided with a successful retry.The bottom line: Disabling Lockdown Mode was a successful workaround, but calling it the root cause is premature. Apple's published documentation does not establish a link between Lockdown Mode and macOS update-personalization failures. The successful retry is evidence of an association, not proof of causation, and the underlying reason remains unconfirmed.Re-enabling Lockdown Mode after the update is reasonable if you rely on its security protections.
<< and wait for an update with a fix. >>I recommend you not hold your breath waiting.Unless you have reported your problem to Apple, using one of the methods I posted previously, they don't even know there is a problem. Posting here is not the equivalent of a problem report, any more than posting on reddit. Apple does not have a formal procedure for reviewing these posts.Based on my having no such issues with my very similar Hearing Aids, this is likely to be a 'sample defect' -- problem that is occurring in only a few samples of an otherwise working product. I strongly recommend you consult your Hearing Provider. You paid top dollar for 'High touch' services, and you do not seem to be taking advantage of that.
I must come clean . . . I posed for it.
I want to update my phone 7 to iOS 15.8.8
What do you use in Settings > Appearance > Light or Dark mode?Try using Dark mode. Open Calendar and see the result. Did it help?Another option: Open Calendar app, tap the Calendar icon (bottom right next to the open envelope iconNow you can change the colour of all the calendar accounts you have by tapping the (i) in Red on the right.Do note how many calendar accounts you have and its colour used before you make changes.
My experience proves otherwise. This issue it not isolated to Microsoft only. Events created in Google Calendar exhibit same behavior on iOS
The people on these boards are mostly other customers. Click here and fill out the form.(265298)
I just ran a test alarm. It played 7 notes and then stops. Nothing. There is no alert on my phone. Nothing from the flashlight. It might as well be a text alert.
You are not petitioning Apple in these user-to-user forums where all of us are just fellow users. Submit your concerns to Apple.Feedback - Watch - Apple
Same here. Nothing I tried worked really.I have a lot of storage in iCloud, I signed out and back in to my apple id. I deleted and reinstalled apps. Restarted my phone many many times.Nothing seems to fix this.I dont’t get mails, work slack messages, whatsapp, instagram, tiktok… nothingsometimes it seems to work, but then it goes back to not workingsometimes messages arrive many minutes late.all of this happened after I updated to ios 27.0.1, I also got a weird alarm of “a new device added to icloud” when no device was actually added…If anyone has a permanent fix, please let me know, I am desperate
Another update as someone in here mention about "Audio MIDI Setup". Actually it works. You can follow these steps.Steps to Force Audio Output to not be 24-BitOpen Spotlight Search by pressing Command + Space (or go to Finder > Applications > Utilities).Type Audio MIDI Setup and press Enter.In the left sidebar of the Audio Devices window, click on your target output device that you want to use. In this case, it will be our monitor.Look at the Format dropdown menu under the Output tab.Select a 20-bit option paired with your desired sample rate (e.g., 20-bit Integer at 48.0 kHz). If it doesn't work then lower to 16-bit.It works on my LG monitor.
This worked for me. I had to leave it on 16 bit for my HDMI connection. I'll have to see if it continues to work over the next few days.
Iphone to icloud works, mac syncronize everything with icloud except for contacts.
The symptoms you describe indicate that Contacts is syncing normally between your iPhone and iCloud, but not between your Mac running macOS 27.0/27.0.1 and iCloud. Other users have reported similar Contacts synchronization problems with macOS 27.0.1, although Apple has not publicly confirmed the cause. First, go to System Settings >> [your name] >> iCloud >> See All and make sure Contacts is enabled. Confirm that the Mac and iPhone are signed in to the same Apple Account, check Apple's System Status page for an iCloud Contacts service issue, and make sure the Mac's date, time, and time zone are correct. These are among Apple's recommended checks for iCloud synchronization problems. Apple: If your iCloud Contacts, Calendars, or Reminders won't syncIn Contacts, check the sidebar and make sure you are viewing the iCloud account. If Google, Exchange, Yahoo, or another Contacts account is configured, temporarily disable Contacts for that account without removing it. Also check Contacts >> Settings >> General >> Default Account and select iCloud if that is where you want new contacts stored. The Default Account determines where new contacts are saved; it does not control synchronization of existing iCloud contacts. Apple: Change Accounts settings in Contacts on MacNext, temporarily disable any VPN, antivirus, firewall, content filter, network-monitoring, or other third-party security software that can filter network traffic, and test Contacts again. Apple notes that VPNs and third-party security software can interfere with connections to Apple services. Apple: Check for VPN and other third-party security softwareThen perform a two-way test. Create a test contact specifically in the iCloud account on the Mac and check whether it appears on iCloud.com and the iPhone. Then create a separate test contact on the iPhone or iCloud.com and check whether it appears in the Mac's iCloud Contacts. This distinguishes a failure to send changes from the Mac from a failure to receive changes on the Mac. Also check iCloud.com directly to confirm that your existing contacts are present and current there. Apple states that iCloud Contacts keeps contacts synchronized across devices using the same Apple Account. Apple: Keep your contacts up to date with iCloudIf both directions fail on the Mac while the iPhone and iCloud.com continue to synchronize normally, and the problem remains after temporarily disabling other Contacts accounts and network/security software, you have ruled out several common configuration and connectivity factors. If Apple's standard troubleshooting has already been completed, I would avoid repeatedly rebuilding or modifying the Contacts database and instead report the issue to Apple Support, providing the results of the two-way test. Using the Product Feedback - and make it known to Apple regarding this ongoing issue
I am not trying to dispute anything you have said. My resound Vivia VI960S-DRWC right and left have encountered ONLY the initial requirement (right after iOS 27 upgrade) that they be re-paired with the new version of the Smart-3D app in a multi-step process. They had to go back into the charger TWICE during that process, under a prompting script provided by the Smart-3D app.I have not had ANY of the issue you are reporting.That may mean there is a Hardware problem somewhere. I recommend you contact your Hearing Provider. If this is as widespread as you suggest, they will need to intervene to provide support for their Users.
I was astonished to see the same thing, soon after updating to 27.0.1 on my (quite expensive and allegedly fast) new Mac mini M5 Pro. First I tried to drag around 50 songs into a new playlist. Several tries, spinning beachball, and when I saw the green plus symbol, I released. But the playlist remained empty each time. So I dragged one song into the list and that worked as it should. Next I dragged in the other tracks from that same album, and saw 10 copies of each song (except for that first one)!And yes, this is only one of several new problems in “Music”.
My new iphone18 Pro is also poor. Sometimes the connection goes back to 'dalek speak' - spoken words indecipherable and intermittent - like it was 20 years ago. I cannot find any setting which seems to make a difference. Thoughts please...
Sound issues after updating to 27.1 - no sound from keyboard, phone, messages or alerts or vibrations. I was able to fix it last night and I have no idea how but when I turned phone off and back on today I again lost sound. Come on Apple, this is not acceptable! What permanently fixes this?
I have the freeze issue on Macmini running sequoia15.8.1 I followed the HMRC workaround as you said but it made no difference.However, by chance I clicked on the MacOS Unix Executable File (found in finder - BPT contents) and hey presto, it opened immediately via terminal (default). Perhaps worth trying if like me you get frustrated!
"More work?" Walkie Talkie takes your second hand and you have to push a button. Hands free Siri just requires you to speak. I don't know anyone who used the Walkie Talkie feature, which may be why it was removed; all the younger people I know always go with the hands free option and communicate (and many other things) hands free by just speaking to their watch. It's also safer when one is driving or on a bicycle.
Update and
workaround: this seems to be a known and widespread bug (that was reported widely by developers during beta testing) that largely seems to impact the icon view in finder. Users are reporting that the problem seems to not exist in the list view on finder. Until apple gets their act together with this update, the workaround that seems to be working so far is to change all finder views to list view. I have done so and I'm able to drag and drop as usual. See this thread for many other issues: https://www.reddit.com/r/MacOS/comments/1wgek2q/macos_27_golden_gate_bugs_and_issues_megathread/ Here are the instructions for changing the finder views to list view: To set List view as the universal default across all Finder windows and folders, follow these steps:1.Open a fresh Finder window:Start in a standard folder like Documents or Downloads.Open Finder and navigate to your main Home folder or any standard directory.2.Switch to List view:Press Cmd + 2 on your keyboard (or click the List view icon at the top of the Finder window) to change the view layout.3.Open View Options:Press Cmd + J (or select View > Show View Options from the top menu bar).4.Check 'Always open in list view':At the very top of the View Options panel, check the box for Always open in list view (and check Browse in list view if available).5.Set as default across macOS:At the bottom of that same panel, click the Use as Defaults button.Nuclear Option: Reset Folder Views via TerminalIf individual folders have custom view settings stored in hidden .DS_Store files, they might ignore the global default and stick to Icon or Column view. You can clear those custom settings system-wide using Terminal:Open Terminal.Run this command to delete custom folder view preferences across your account:Bashfind ~ -name ".DS_Store" -depth -exec rm {} \;
Restart Finder:Bashkillall Finder
Once reset, every folder will automatically conform to the global List view default you just saved.
No worries, please contact apple support (Official Apple Support) as no one here are apple themselves.Thanks,
Similar case with mine ipad too, im using ipad air m3 and updated to ipadOS 27 few days ago. my apple pencil pro was working fine but suddenly the battery percentage started dropping even when it is attached to the ipad. when i detach and re attach the pencil it show charging icon but the percentage won’t go up. I tried restarting the ipad but still same issue. I know its nothing to do with the battery inside the pencil , it may some bugs in the OS itself.
I have the exact same issue. I thought it was just me so it must be a bug. It didn't happen on my Ultra 3 running WatchOS 27 but got the Ultra 4 on Friday and noticed all today that pressing the action button does nothing. I have to raise my wrist and tap it a few times before the flashlight kicks in. Hoping it gets fixed soon.
Identical problem as me Sergio! I’m using Air 2020 i3 too. I’ve found using the DuckDuckGo browser will play, so perhaps try that.
No, you cannot automatically block or filter out all AI-generated music on Apple Music The platform does not currently provide a user-facing settings toggle or filter to exclude AI-created tracks from algorithmic stations or recommendations.
Can you please send me the link where I can upload pictures of my Apple Gift Card
Please don’t do that.As I had mentioned in my original reply, you need to contact Apple Support directly.Good luck! 👋🏼😉Smiliñ 😎 Brian | Community Volunteer
Hi Everyone, I manage Apple devices and have found a way around this that is very easy to follow along with. For this process ensure your Apple TV is hardlined into your network via ethernet cable rather than rely on wifi as part of the process involves wiping the device.Traditionally, the steps to add a Apple TV 4k with ethernet involve booting the apple tv up and ensuring it is on the same network as your computer running apple configurator. You then go to Paired Devices in apple configurator and find the Apple TV listed. As we all know, as of tvOS 26.4 and even up to the latest release of 26.6 the AppleTV no longer shows up here.FIX:Go through the setupassistant of the Apple TV so you can get to the HomePage.Update your AppleTV to tvOS 26.6Next, navigate to Settings > Remotes and Devices > Remote App and DevicesThis will now put the Apple TV into a state of looking for nearby devices.On your Computer with Apple Configurator, launch the software and navigate to Paired Devices. You will now see your Apple TV listed. Select "Pair", enter the code, proceed with preparing.You will likely get an error and it will tell you it has already been prepared and that you need to wipe the device. Wipe the device. When the wipe is complete and the AppleTV comes back online you will now notice it reappears in Apple Configurator simply as "Apple TV". Select Pair, enter your code, and then right click and prepare.Congrats. Apple TV is now in ABM, pat yourself on the back.
Hi. It's an iPhone 16 pro.
That VPN may well be part of the issue
Our Baseline Security mode detects the Apple Internet Accounts (AppID f8d98a96-0999-43f5-8af3-69971c7bb423) which is for the native mail app in iOS/iPadOS and it uses EWS.I'm assuming it's the case for mattias152 and others. I spoke with an Apple Senior Advisor, they stated uncertainty of new changes or when, but to call back at a later date / look out for Apple communications.
I had an identical problem while restoring my iphone 11 Pro. Got the error 1109 multiple times and it would hang in between the restore process. I was using Apple Devices app on Windows 11 Business. I tried using the suggestion from one of the users here of switching from Wifi to Mobile hotspot. But it did not work. Finally uninstalling Apple Devices and using the iTunes app on Windows allowed me to restore my iPhone.
I had the same issue when updating to 18.3.
1. It would close down ITunes on my PC. Updated to Apple Devices for Windows. That worked a little better but still failed. I got the (1109) 06B4.000 error. I hooked by IPhone to my work MAC and it was able to finally perform the update all the way through. I had backed up my IPhone prior to performing the update and was able to use Apple Devices to Restore from the Backup. This seems to be a Windows Issue with the new update. I don't recommend downloading via your PC until Apple figures out this bug.