Same here, just noticed it today. Exact same issue, probably a newly introduced bug.
Yes that’s exactly where I’m looking. I’ll post the pictures as a reference
> What you mean with “it won't get any more updates”?Imagine the scenario where you have OldMac (now retired) and NewMac (bright and shiny).Let's say that your old Time Machine backup of OldMac has 100 snapshots going back 3 years, from November 2023 though November 2
026. These backups consume 1TB of the 2TB drive (fill in your own numbers :) )You connect this drive to your NewMac and do not inherit the old backup:The OldMac backups will stay as they are. They will consume 1TB of storage, and will not grow while this drive is connected to NewMacThe space used will also never shrink - since it's not active, Time Machine will not cull old backups to make space.Therefore you have 1TB of space for new backups of NewMac.If the drive fills up (1TB of old backups for OldMac, and 1TB of backups for NewMac), then TimeMachine will only delete data from NewMac's backups to make room for new data, since it isn't allowed to touch OldMac's data.
Note: the above changes if you keep OldMac running and periodically connect the drive to OldMac - Time Machine will append new data to this backup, as well as clean old ones as needed. You essentially have two backup streams on this drive.Alternatively, you connect this drive to NewMac and do inherit the old backup.Now Time Machine considers the three years of old data as relating to this NewMac. Any file changes to NewMac will be appended to the existing three years of backups, and you can restore any of that 3-year old data onto NewMac.In this scenario, the drive can NOT be connected back to OldMac (or, more specifcally, you can connect it, but it won't act as a Time Machine backup for OldMac, since the backup stream is now 'owned' by NewMac).So the choice depends on what you want to do with that backup data. If you want to keep OldMac running in parallel, then you may want to keep a separate backup stream for it. If your goal is to retire OldMac, then it might make sense to inherit the history.In summary, you have three options:1) Run OldMac and NewMac in parallel, each with their own Time Machine backup -> Do NOT inherit, and periodically plug the drive into each Mac to run the backup2) Retire OldMac, but keep a copy of its data intact for posterity/archive/trus purposes -> Do NOT inherit, and leave the old backups as-is3) Retire OldMac and never look back -> DO inherit - OldMac's data will be considered part of NewMac's until the backup drive fills up and Time Machine needs space.Does that help?
Yes, you're correct. When you start your iMac in macOS Recovery, you should see a window with four options, including Disk Utility at the bottom.The error message “The recovery server could not be contacted” generally indicates that your iMac cannot communicate with Apple's recovery servers. This can happen because of an Internet connection problem, an incorrect system date and time, or an issue with the older macOS High Sierra recovery installer ... which also may indicate that this iMac is much older than 6 or 7 years old.Before attempting anything else, let's identify your iMac and check a couple of things.Identify your iMac: Look on the underside of the iMac's stand for its serial number. You can enter that number at checkcoverage.apple.com to see whether Apple identifies the model. Please let us know the model and year, if available. Don't post your serial number here.Check your Internet connection: While in macOS Recovery, look for the Wi-Fi symbol in the upper-right corner of the screen. Make sure your iMac is connected to your Wi-Fi network. If possible, connecting directly to your router using an Ethernet cable would be preferable.Check the system date: From the menu bar at the top of the Recovery screen, select Utilities > Terminal. Enter the following command and press Return: dateThis will display the date and time currently set on your iMac. Please let us know what it reports.For now, there's no need to erase the disk again or attempt another installation. Once we know your iMac model and have confirmed its Internet connection and system date, we can determine the most appropriate way to reinstall macOS.However, please be aware that, most likely, this Mac will be considered "Obsolete" by Apple Support and may not be worth the effort to get it up and running.
You can't. You're far beyond the 14-day return policy; physical software packages, once opened, weren't covered by it anyway.(265500)
Well, according to another AI, if Apple Intelligence is not enabled (either because your device doesn’t support it, or you turned it off in your system settings), the Mail app behaves entirely like traditional email clients:No On-Demand Summarizing: The Summarize button at the top of long emails or threads will not be available.I guess it is a bug then.
You may be able to utilize the third party software LibreOffice which is similar to MS Office. For simpler documents this should be fine especially if people are careful with their formatting of documents.Microsoft does offer online access to their office suite by using a web browser (need a MS account). Basic functionality is fine, but it is not quite the same as the full stand alone apps. This should work as long as you are using a third party web browser which is up to date. Firefox seems to be the best browser as they tend to support older versions of macOS the longest. Most Chromium based browsers will only support about the 5 previous versions of macOS.....I think Chromium based browsers just recently stopped supporting macOS 12.x Monterey....so macOS 13.x Ventura is the oldest macOS for Chromium based browsers.
FYI, Apple has had some issues with providing parts this year. Some times with some parts (seems to vary) we have seen some parts at times take up to three weeks or so to become available.As @BobTheFisherman mentions, you need to contact Apple directly. If you had an Apple Store or an AASP take the laptop for repair, then contact them instead to provide you with an update.....even if they ultimately mailed it out to an Apple mail-in repair depot, they should be able to ask them for an update.
Thank you so much for that detailed response. Sadly, it didn't work. The issue is definitely with preview permissions as 1 worked without issue. Going through steps in 3 resulted in the same problem. What's more interesting to me, is that I don't have the issue with adobe though the situation is slightly different. With a PDF open, I can save as > duplicate folder > save PDF to duplicated folder with no error message. So its not even consistently an issue with duplicating a folder from a program's save menu. Who knows.... If you have other suggestions, I'm all ears. Thank you again for your help.
Hi Elly220,Please refer to previous threads where this problem was mentioned. See below 👇 some of my photos are missing - Apple CommunityLost pictures on phone photo gallery - Apple CommunityMissing Photo Library - Apple CommunityHopefully that solves it for you. Have a good day! 😄
FaceTime is NOT an option for our Apple Watches recently purchased. Please stop assuming. My post is for advising those who recently purchased one of the newer watches w/in the past 3 months. Walkie-Talkie WAS part of the core functionality, same as PHONE, MESSAGES, MAIL, ETC. To be honest, a lot of other apps could have been removed, never, ever use them. However, the communication apps should have remained. And again, FaceTime is NOT a part of our NEW Watches. Apple should be adding, not lessening core products. Or the better option: remove the Walkie-Talkie hardware option from newer hardware products, while not stripping consumers of something they purchased wholly.
Typically, yes, even if moving to a foreign country. However, many of the benefits do not apply outside the US, so you’d need to be more specific if you need more information.
You can change the background in Messages:Add backgrounds in Messages on Mac - Apple SupportI've never tried to change the page color in Word. A quick internet search suggested this:To change the color of the actual paper/page inside your document:Go to the Design tab in the top ribbon (or Page Layout in older versions).Click Page Color in the Page Background group.Choose a theme color, standard color, or click More Colors / Fill Effects for custom shades.
The visual freezing behavior you are experiencing on one account is a known macOS WindowServer rendering bug linked to Fast User Switching. When you keep multiple user accounts logged in simultaneously and switch between them, the "Shake to find cursor" feature often causes the cursor UI to desynchronize, rendering it completely frozen for a brief second while the scale animation triggers. Fixing the Shake-to-Freeze BugBecause this is an active operating system glitch tied to concurrent user sessions, you can eliminate the freeze by applying one of these methods:Turn off "Shake to Find" on the affected account: Go to the Apple menu > System Settings > Accessibility > Display. Scroll down to the Pointer section and toggle off "Shake mouse pointer to locate". This stops the system from trying to scale the cursor, which immediately prevents the UI freeze. Avoid concurrent active sessions: If you completely log out of your first account before signing into the second one (instead of using Fast User Switching), the rendering bug will not trigger.How to "Warp" Your Pointer macOS does not have a native, built-in feature to automatically warp or snap your cursor to the Dock or a specific quadrant via a keyboard shortcut. However, you can achieve this easily using native scripting.You can create a custom automation that teleports your cursor to a fixed screen coordinate.Open the built-in Shortcuts app on your Mac.Click the + (plus icon) to create a new shortcut.Search for the Run AppleScript action on the right side and drag it into your workflow.Replace the default text with the following script (adjust the coordinates for where you want the cursor to go):on run {input, parameters}
-- Change the numbers below to match your preferred X and Y coordinates
-- For example, X=960 and Y=1000 centers the cursor near the bottom dock on a 1080p display
do shell script "python3 -c 'import objc; ns = objc.lookUpClass(\"NSEvent\"); print(ns.mouseLocation())'"
-- To force set coordinate, we use CoreGraphics via python:
do shell script "python3 -c 'import ctypes; cg = ctypes.CDLL(\"/System/Library/Frameworks/CoreGraphics.framework/CoreGraphics\"); cg.CGWarpMouseCursorPosition((0, 0), ctypes.c_double(960), ctypes.c_double(1000))'"
return input
end run
Click the Shortcut Settings icon (the sliders in the top right corner), select Add Keyboard Shortcut, and record your favorite key combination (e.g., Control + Option + Command + D)
I recently updated to 27.2.1 after having issues in 27.2, and everything seems to be working as expected now. Can anyone else confirm this? Here was what I tested:Tested today on two Macs against the same SMB share and the same Final Cut Pro 12.4 library:macOS 27.2 (26B123): the library’s symlinks in Original Media show as plain 1067-byte files, media offline, relink only holds until FCP is quit.macOS 27.2.1 (26B131): same files show as symlinks, media online, new “leave files in place” imports survive quit and reopen.Nothing changed on the server between the two tests. 27.2.1 (released Nov 9) seems to fix it. Existing libraries came back without relinking.
Unfortunately i'am already on a newer version (was in a hurry), where the bug is still present. :(
If you don't have MS Word installed, then what App are you editing the document in? Remember, we can't see what you see, so we don't know what you are doing unless you tell us. Usually you would want to have the Word app to edit Word documents. If you don't, it may be defaulting to a different app like Apple's own Pages app.Sounds like it is opening the file in Pages which converts the file into a Pages document before opening it, and when you save it, it saves as a Pages document, not a Word Document. So it's understandable the recipient then can't open it on a Windows PC without the Pages App. If this is true, then when saving the document in Pages, select the "Export To" option from the File menu instead of Save, and choose the "Word..." option to save it as an actual Word document. Beyond that, you may want to get Microsoft Word if you are going to be sharing Word documents as Pages' translation is not always 100% accurate and there may be discrepancies specially in heavily formatted documents that use very specific Word formatting and set up.
Contact Apple Support directly and ask to have the issue escalated. Contact - Official Apple Support
I tested by opening an 89KB Word doc cloud-stored in DropBox. Our home internet is a modest 300MB/sec cable service. Office 365 and macOS are fully updated on my 2024 M4 Pro MacBook Pro with the base 24GB RAM and 1TB storage. The Word app was NOT open a the time the test.The file opened ready to edit in just over three seconds. That suggests to me that this is not a universal problem.On older Intel Macs with mech hard drives, slow-opening of Office files seemed de rigueur. What Mac is yours?Have you installed any aftermarket utilities like antivirus, "cleaning" apps, or client-side VPNs. Other than a slow mech hard drive, those are my prime suspects.
Hi,I just wonder if your external drive is self powered drive or bus powered one. If it's a bus powered, your Mac mini is not able to supply good enough power to the external drive since Apple Silicon Mac is inherent bus power.
Hello~ See below…Apple Support - App StoreDownload apps on your iPhone or iPadWhat device and version of iOS?~Katana-San~
Unless you actually cancelled it, it would still be tied to your account, and it will renew the moment it can be charged. Update your payment method and it will attempt to charge the pending subscription and renew it at that point.
<< the automatic restore process fails during Recovery. >>That is far too vague for users to provide help.What EXACTLY are you doing, step by step, and ... when it stops working, what are the major symptoms that it is failing?
First, you don't seem to understand the distinction between memory & storage. Your 1TB is how much storage you have on the internal SSD while the 32GB of RAM is the amount of memory your system has. Here is an article which may help to explain the differences:https://www.backblaze.com/blog/whats-diff-ram-vs-storage/Second, you mention you are "almost out of memory". Do you mean storage space on that 1TB internal SSD? If so, then that would be a huge problem which a backup won't solve. How much Free storage space is shown in Disk Utility? Avoid the very misleading "Available" storage value shown everywhere since it is not synonymous with Free (except perhaps with macOS 27.x Golden Gate). Ideally most people should always have at least 80GB to 100GB of Free storage space since even that amount can sometimes quickly disappear for seemingly simple workloads. Some people may need to have lots more Free space if their workloads utilize lots of storage such as video editing. If you have less than 20GB of Free storage space, then you have a storage problem which you need to resolve by either relocating the largest items to external media or by purchasing another computer with more internal storage. Some reasons why an external drive won't work includes the external drive requiring more power than the computer can supply. In this case, either use a dedicated power supply with the external drive or connect it to a USB hub or dock which provides extra power to its USB ports. Another reason is you may need a higher quality USB cable. The cables shipped with the product from the manufacturer many times will be low quality cables just barely able to support the device. Macs tend to require higher grade cables ever since the release of macOS 26 last year (cables should also be less than one meter in length). Make sure to try connecting the external drive directly to the computer and try other USB ports on the computer to see if that makes any difference. If that does not work, try using a powered USB hub. Also, make sure you have properly erased the whole physical drive as GUID partition and APFS (top option). If you don't erase the physical drive, then some of the original partitioning from the factory will not be overwritten which can sometimes cause a problem. Unfortunately Disk Utility hides the physical drives from view by default. See the following Apple article for details on how to properly erase the whole physical external drive:https://support.apple.com/guide/disk-utility/erase-and-reformat-a-storage-device-dskutl14079/macNow if your "almost out of memory" is really about macOS showing all your memory (aka RAM) as being used, then this is perfectly normal these days. As long as the Memory Pressure graph in Activity Monitor is not showing red or yellow, then you are Ok. If the Swap used value next to the memory pressure graph is over 10GB even if graph is green, could indicate your workloads need to be modified to utilize less memory. As @KiltedTim mentions, we need more details on exactly what happens & does not happen with each attempt including any exact error messages. FYI, AI is over rated. Half the stuff these AIs were trained on is outdated especially when it comes to Macs and macOS. Plus there is a lot of junk & misinformation about Macs out there as well.....the AI learned that as well. AI can be useful if someone already has a good understanding of the topic as that person can weed out the junk spewed by AI, but won't they won't recognize the junk if they are not familiar with the subject matter. This is what the AI companies don't tell people. Perhaps one day this will change.
Note that there is a difference between an account being "inactive" or "deactivated", and an account being "disabled". If your message says it is disabled then reasons for that are presented in this support article: https://support.apple.com/102640 ● https://support.apple.com/HT208856 or "You cannot login because your account has been locked”you might be able to request reactivation by tapping Continue right from the alert, if available. If that does not work, Apple provides a link for this specific issue. Tap or click here and choose a self-help or contact method ➞ https://getsupport.apple.com/?caller=kbase&PGF=PGF63005&category_id=SC0245&symptom_id=23362 . ● If your account has been disabled for “security reasons” the solution is to reset your password as outlined in this article: https://support.apple.com/102656 If you find you can’t sign in, reset your password, or receive verification codes, request account recovery as outlined later in the support article (direct link —> https://support.apple.com/102656#:~:text=If%20you%20can%27t%20reset%20your%20password%2C%20request%20account%20recovery ). More detail in —> https://discussions.apple.com/thread/255401538?answerId=260044580022#260044580022 For additional assistance from Apple, go to: https://support.apple.com/106932 and try to connect with live support. ● If your account says “Account [is] locked”, or it is inactive, you might be able to request access to your account by tapping Request Access right from the alert, or by using this link —> https://iforgot.apple.com/unlock If that does not work, this link (versus one taking you to the general support page) is the most direct way to get to the people helping you with this —> https://getsupport.apple.com/?PGF=PGF63005&category_id=SC0245&symptom_id=23626 A telephone number may be provided at the bottom of this support article --> https://support.apple.com/HT201232 ● Additional reasons (e.g., “This account is locked and cannot be used “ = https://support.apple.com/102640#:~:text=If%20you%20can%E2%80%99t%20regain%20access%20to%20your%20Apple%20Account):According to various posts, Apple may permanently lock accounts for other reasons. See https://www.apple.com/legal/internet-services/itunes/us/terms.html#:~:text=By%20creating%20an%20account (sections A, C and F in particular) and https://www.apple.com/legal/internet-services/itunes/us/terms.html (sections iV and VII in particular). That may be the case here if none of the previous reasons in the locked accounts support article apply to you. If it isn’t apparent, contact Apple and ask if that is the situation, but don’t expect them to tell you why. You, or somebody who has managed to get access to your account, are likely doing something Apple is interpreting as account misuse. You will have to see if these activities could be construed—rightly or wrongly—as meeting any of Apple's conditions in the terms documents. You will need to create a new account and avoid doing things that may have caused the other account to be locked. In this situation you may be able to still use your equipment with a new account or even no account at all. Apple can completely reset a device if a person can provide sufficient evidence of valid ownership. Check the requirements and steps at: Activation Lock support request - https://al-support.apple.com/#/additional-support Apple says, "Proof of ownership documentation is required," but does not detail what currently constitutes proof other than it “must include the product serial number, IMEI or MEID.” Apple may typically require the original receipt* issued by Apple or an Apple Authorized Reseller. If Apple resets the device this will give you access to the device but won't restore access to the account used to lock it. There is nothing that can be done to expedite an Activation Lock request.*Apple recommends you "Keep your receipt after you buy an Apple device" --> https://support.apple.com/102264
Does the github Skript allow to use Time Machine Back-up by migration assistant? I know I have to set up the computer first, run the script and maybe the assistant sees it too?
FWIW, in the past when i plugged in drives that were continually flashing but not mounting usually was one of three things: bad cable, bad drive, power issue.In the second case, I had found that the drive itself was good but the electronics built into the enclosure were faulty.In the third case, for bus powered drives, I have found that some were on the edge of of their power draw and a small change (could be anything from physical to firmware) pushed it over the edge of not being able to run properly.Lastly I bring up the first case. This can relate to the third case and/or relate to data passage. A connector that may be on the edge of tolerances can exhibit random behavior and your erroneous of trying to plug in the wrong thing may have pushed it past the edge.You may also have shorted USB power lines when trying to plug in the wrong thing. while they do have some protection for this sort of event, its not perfect and may have fried the ports.
First, do not worry. You' are not out of options! Let us slow things down and establish exactly what is ’happening before attempting any more password changes.I suspect your Apple Account password may have changed successfully, but Face ID, automatic sign-in, or confusion over which email address you are using may be complicating matters.
1. When your iPhone asks:Remove Other DevicesStay Signed In EverywhereChoose Stay Signed In Everywhere for now. We don't want to unnecessarily disrupt your access on other devices.
2. On your iPhone:Open Settings.Tap your name.Note the email address beneath your name.Tap Sign-In & Security.Make sure this is the same @icloud.com address you are ‘been using on your MacBook.
3. If you have already reset your password and Apple confirmed the change, do not reset it again.If not, go to:Settings > Your Name > Sign-In & Security > Change Password.Follow the instructions, create a new password, and write it down temporarily in a secure place. Make sure Apple confirms the change.
4. On your iPhone:Open Safari and start a Private Browsing session.Go to https://account.apple.com.Enter your full @icloud.com address.Choose manual password entry rather than Face ID or a passkey, if offered.Enter your new password.If Apple requests a six-digit verification code, enter it.If you sign in successfully, we know the password works.If Apple rejects it, stop. Don't try old passwords or reset it again.If an error message appears, note its exact wording.
5. Three things we need to knowA. What email address appears beneath your name in iPhone Settings? You can mask part of it.B. Did Apple explicitly confirm that your most recent password change was successful?C. What exact message appeared when you tried signing in with the new password?One final precaution: Do not sign out of your iPhone or MacBook just yet.Let us get your Apple Account sorted out first. Once we have confirmed the password, we will tackle the MacBook Air.
If you are not part of an Apple Family Sharing group and want to set up Screen Time restrictions for your own iPhone, you can do so independently. You have two options: set Screen Time limits with a dedicated Screen Time passcode or use Screen Time without setting a passcode.
1. Setting up Screen Time without a passcodeYou can configure and use all the available Screen Time features, including App Limits, Downtime, and Content & Privacy Restrictions, without setting a passcode.However, remember that without a passcode, you can easily modify or disable these restrictions yourself. Therefore, they offer less protection against accidental or impulsive changes.
2. Setting up Screen Time with a passcodeIf you have not previously set a Screen Time passcode, open:Settings → Screen TimeScroll down to the bottom of the Screen Time settings page. You will find the Lock Screen Time Settings option, as shown in Image 3 below.Tap this option to secure your Screen Time settings. You will then be prompted to:Enter a four-digit Screen Time passcode.Re-enter the same passcode for confirmation.Provide your Apple Account credentials or configure the available passcode recovery option, as prompted, so that you can reset the passcode if you forget it.Once the passcode is enabled, you will also see the Change Screen Time Passcode option. You can use this to change your existing Screen Time passcode whenever required.
Important: The Screen Time passcode is entirely different from your iPhone Lock Screen passcode. They serve two different purposes and should not be confused.The Screen Time passcode prevents changes to your Screen Time restrictions without authorisation. Your iPhone Lock Screen passcode, on the other hand, protects access to your device.Refer to the pictorial, step-by-step instructions below for a better understanding of the entire process.
Hello,I see you apparently have an account access problem but have not provided the exact error message which would indicate a specific solution such as those in this support article: https://support.apple.com/102640 ● https://support.apple.com/HT208856 or "You cannot login because your account has been locked”you might be able to request reactivation by tapping Continue right from the alert, if available. If that does not work, Apple provides a link for this specific issue. Tap or click here and choose a self-help or contact method ➞ https://getsupport.apple.com/?caller=kbase&PGF=PGF63005&category_id=SC0245&symptom_id=23362 . ● If your account has been disabled for “security reasons” the solution is to reset your password as outlined in this article: https://support.apple.com/102656 If you find you can’t sign in, reset your password, or receive verification codes, request account recovery as outlined later in the support article (direct link —> https://support.apple.com/102656#:~:text=If%20you%20can%27t%20reset%20your%20password%2C%20request%20account%20recovery ). More detail in —> https://discussions.apple.com/thread/255401538?answerId=260044580022#260044580022 For additional assistance from Apple, go to: https://support.apple.com/106932 and try to connect with live support. ● If your account says “Account [is] locked”, or it is inactive, you might be able to request access to your account by tapping Request Access right from the alert, or by using this link —> https://iforgot.apple.com/unlock If that does not work, this link (versus one taking you to the general support page) is the most direct way to get to the people helping you with this —> https://getsupport.apple.com/?PGF=PGF63005&category_id=SC0245&symptom_id=23626 A telephone number may be provided at the bottom of this support article --> https://support.apple.com/HT201232 ● Additional reasons (e.g., “This account is locked and cannot be used “ = https://support.apple.com/102640#:~:text=If%20you%20can%E2%80%99t%20regain%20access%20to%20your%20Apple%20Account):According to various posts, Apple may permanently lock accounts for other reasons. See https://www.apple.com/legal/internet-services/itunes/us/terms.html#:~:text=By%20creating%20an%20account (sections A, C and F in particular) and https://www.apple.com/legal/internet-services/itunes/us/terms.html (sections iV and VII in particular). That may be the case here if none of the previous reasons in the locked accounts support article apply to you. If it isn’t apparent, contact Apple and ask if that is the situation, but don’t expect them to tell you why. You, or somebody who has managed to get access to your account, are likely doing something Apple is interpreting as account misuse. You will have to see if these activities could be construed—rightly or wrongly—as meeting any of Apple's conditions in the terms documents. You will need to create a new account and avoid doing things that may have caused the other account to be locked. In this situation you may be able to still use your equipment with a new account or even no account at all. Apple can completely reset a device if a person can provide sufficient evidence of valid ownership. Check the requirements and steps at: Activation Lock support request - https://al-support.apple.com/#/additional-support Apple says, "Proof of ownership documentation is required," but does not detail what currently constitutes proof other than it “must include the product serial number, IMEI or MEID.” Apple may typically require the original receipt* issued by Apple or an Apple Authorized Reseller. If Apple resets the device this will give you access to the device but won't restore access to the account used to lock it. There is nothing that can be done to expedite an Activation Lock request.*Apple recommends you "Keep your receipt after you buy an Apple device" --> https://support.apple.com/102264
Error 7002 is Music refusing a library file that old: it only converts libraries last saved by iTunes 12, so a 2011 one has to pass through iTunes 12 on a Mac running Mojave or earlier first, and that is the only route that keeps plays and skips. Without that Mac, look in the old iTunes folder for iTunes Music Library.xml and use File > Library > Import Playlist in Music: you get your tracks and playlists back, but not the counts. Once it's rebuilt, Katalog is an app that runs alongside the Music app and keeps its own copy of your ratings, play counts and playlists, so the next move doesn't cost you them again (I made it).
Same problem for Manitoba. Calendar events displaying 1 hour behind. IOS has recently been updated and did not correct the problem. There isn’t any update for the calendar in the App Store.
You're really better off handling the Motion Blur inside Motion and then rendering out (a copy of) the footage. There's no way to publish the Shutter Angle and Samples parameters, so each variation has to be made as a separate effect. It's very tedious, and if you don't get it right the first time, you have to keep going back to remake the effect.In Motion, just make sure your Project length is exactly the same length as the footage being blurred. You will be able to experiment with different settings to find the one you want. Then, just export the new footage to use in FCP.My Motion Blur effects are a commercial product. If I give out the entire explanation **here**, AI will just steal them from me and I might as well just throw them away. They're obscenely cheap as it is, considering how much work went into them.You have everything you need to know in this post, I just haven't **explicitly** said how you need to put it together. If you understand what you need to do, then you can build your own collection of *frame accurate* Motion Blurs in Motion. And if you do figure it out — don't post it here!
What is a Wallet monthly statement? I get a statement for Apple Card, and Apple Cash, but that’s it. Goldman Sachs is the issuing bank for Apple Card Mastercard credit card. But they don’t have anything called a Wallet statement. Apple has no support articles on Wallet statements. Can you please explain in more detail what you’re referring to?
as a holdover from previous versions of MacOS, Disk Utility pretends there is no complexity, and shows a sanitized view by default.You need to use the tiny "View" menu set to 'Show all devices'. Then ERASE the DEVICE (not just the Volume) by its immutable manufacturer-given device-name:See that awkward, wonky device-name, "WDC WD740ADFD-00NLR4.. ??Says '(Internal) Physical Disk' so right under the name.
On the destination system..... In the Finder select "Air Drop" from the sidebar so you can configure the destination system to allow Air Drop from "Everyone" so you can use Air Drop without an AppleID. You will be prompted to accept the transfer.....usually without a code, but other times I have found a code will be needed, but it won't be related to an AppleID (may depend on the version of macOS involved whether a code is needed). After the transfer I would recommend restoring that Air Drop setting to "No One" or "Contacts Only".
I get an occasional notification that an event has been detected in an email but I’m always asked if I want to approve it. Nothing ever shoes up without my allowing it.
Heat can have an effect on the Battery Health, but if the iPad gets too hot then you will see the Temperature Indicator on the screen preventing any further action until it has cooled down. More commonly the Battery Health declines quicker when the battery has been allowed to completely discharge where it has to power itself off.
I see there have been five downloads of my YouTube End Screen template... (don't worry - I don't track *who* downloads free templates.)I've been "sitting on it" for over a year trying to decide if it's worth publishing commercially.For those of you who have tried it out — any comments? Is it worth it? Is it junk? Please let me know. I can handle the truth.TIA.Fox——————————————[Remembering rowie302 (Rohan Marks) who passed away Nov 2
024. A very enthusiastic Motion user and contributor here on ASC. https://fcp.cafe/news/20241120/ ]
Root cause of error 1109 (06B4.0000) with Apple Devices on Windows, and a workaround that worked for meTL;DR: I think it's a bug in Apple Devices itself, not your network, firewall, VPN, antivirus, cable or IPSW.I reported it to Apple as ***. Below is a workaround that got my iPad updated.
How to recognize it: open the updater log (folder "iPad Updater Logs" or "iPhone Updater Logs"). Near the end you'll see three"The request timed out" lines, then "Error retrieving WKMS decryption key", then error 1109 withfingerprint 06B4.0000.
What happens: since iOS 18 the system image inside the IPSW is encrypted. During the update the PCmust download its decryption key from Apple's CDN (fcs-keys-pub-prod.cdn-apple.com). The CDN sendsthe key together with some TLS housekeeping data (session tickets) in a single network packet.Apple Devices' own built-in network code has a bug: in that case it never notices the reply andwaits until it times out. I confirmed this by tracing the connection: the server answers in 0.14 s,and Apple Devices just doesn't pick it up. Changing DNS, using a hotspot or a VPN only helps when thepackets happen to arrive split.Workaround (Windows, needs admin rights and Python 3). It makes the reply arrive in separate packets.The connection stays encrypted end-to-end with Apple, and nothing else on the PC is affected.
1. Install Python 3 from python.org or the Microsoft Store.
2. Download apple_key_relay.py from protomi/apple-devices-windows-ipad-update-tmp-fix (the code is short, read it first).
3. Open PowerShell as Administrator and run: Add-Content "$env:WINDIR\System32\drivers\etc\hosts" "`r`n127.0.0.1 fcs-keys-pub-prod.cdn-apple.com"; ipconfig /flushdns
4. In a normal PowerShell window, go to the download folder and start the relay: cd $HOME\Downloads
python apple_key_relay.py (if "python" is not found, use: py apple_key_relay.py)
Leave that window open. It should say "relay running".
5. Quit Apple Devices completely: close it, then in Task Manager also end "AMPDevicesAgent". Reopen Apple Devices.
6. Choose UPDATE, which keeps your data. Do NOT choose Restore, which erases the device. When the update reaches the old failure point, the relay window prints a "connection ..." line, and the update should continue.
7. When it's done, remove the hosts line (PowerShell as Administrator): $h="$env:WINDIR\System32\drivers\etc\hosts"; (Get-Content $h) | Where-Object { $_ -notmatch 'fcs-keys-pub-prod' } | Set-Content $h -Encoding ASCII; ipconfig /flushdns
Then stop the relay: press Ctrl+C in its window, or simply close that window.Worked for me: iPad Air (5th gen), Windows 11 25H2, Apple Devices 1.1792.39682.0, update iPadOS18.3.2 -> 27.2, after 4 identical failures. Use at your own risk, and back up first if you can.I'm not affiliated with Apple. Hopefully a fixed Apple Devices update makes this unnecessary soon.If you hit this too, please send Apple your own report (feedbackassistant.apple.com orapple.com/feedback) and mention ***: it helps Apple see how many people are affected.
AppleCard is a credit card; you can’t add cash to it. I suspect that you mean AppleCash, if so adding money to your AppleCash from checking requires a debit card in your Wallet linked to your checking account. See more detail here:https://support.apple.com/en-us/108370
Are those records stored locally, on your Mac, or on a TurboTax server somewhere i.e. not on your Mac?If you are not certain, you're at a disadvantage because you are not only asking the limited number of Mac users who even know this user-to-user website exists, a tiny percentage of whom occasionally peruse it for the purpose of helping others, an even smaller number who might have used the product in question, and a statistically insignificant number who might know the answer. That's like... zero.If you are certain that product stores its records on your Mac, then you ought to be able to restore them from a Time Machine backup. TurboTax ought to know the answer to that question, so ask.
I have contacted both hoping one of you might recognize the problem and offer a solution....besides "contact the other party". Are you stating that this is not Apple's problem?
consider this:Settings > Notifications > Hearing Aids > ......Allow Notifications (OFF )
Be aware that Apple Filing Protocol (AFP) is a deprecated format for networking, and while that format works with macOS 26 Tahoe, the format will no longer be supported by Apple starting with macOS 2
7. It was deprecated on the server side with Big Sur (6 years ago), and client side support is now over. You are really best off following Synology's instructions for standing up TM backups to their NAS (setup instructions). Using deprecated formats and unsupported drive formats is going to cause problems, and Murphy's Law says those problems will happen right when you most need the TM backup.
It works on Chrome. It worked on Safari too, right up until I installed 27.
2. I have no ad blocker on. And I've followed every other fix suggested to me by every community, by ChatGPT, and by Grok. It still won't play on Safari and literally freezes when I try. Vexing.
Because you must be in the Main (System Photo Library) to create the Shared Library. Therefore you must be in the main library to see it. You can go into the Photos Settings in the other library and make it the System Photos Library to see the Shared Library. As Richard indicated share you concerns with Apple at the link he provided.
Maybe post a screenshot of what you're seeing. I'm having a hard time picturing what you're seeing.
I ended up reporting it in both areas. Feedback Assistant was the only place that allowed me to specifically select “walkie-talkie”. Product feedback seemed to be more generic. 🤷🏻♀️
You are correct about that. However, I now have iphone 17 pro max and iwatch 12 set up and even though it is working to confirm from the iwatch 30% of the time, I normally have to go to the phone to confirm. Both units have IOS 27.2Must be something in the handshake between phone and iwatch I assume, but nobody seems to know and I am stuck.
Does iPhone14 have the same features to go back to original calendar?
I gave up on the Apple Calendar from the start in 2007, it was just too limited for my needs. I have used WeekCal for my business, entertainment and personal event planning. I originally used it on my Palm Pilot and Palm Treo. There are other outstanding calendar apps in the App store, and I suggest you check them out. FantastiCal also gets great reviews.
I decided the work around was a bit weak so I made it easier to run with a downloadable Mac OS app that does all you need: https://payrollrti.uk/its just doing what the HMRC guidance says in the background but no messing with consoles and port numbers. Free to anyone who needs it since I needed it myself!
The same it happened to me. Did you find any solution?
I'm experiencing the same issue, and it is still not resolved as of October 26, 2026.Affected devices:iPhone 17 Pro — iOS 27.0.1 (Build 24A446)iPad Pro M5 — iPadOS 27.0.1 (Build 24A446)Videos on my university's online learning platform fail to play in both Safari and Chrome. The player reports MEDIA_ERR_SRC_NOT_SUPPORTED (Error Code 4).I investigated the issue using Safari Web Inspector and found something interesting.The problem appears to be related to English subtitle tracks (srclang="en").Videos fail to play when an English WebVTT subtitle track is present.Removing the English subtitle track before initializing the player allows the original video to play normally.Changing only srclang="en" to srclang="ko" also allows playback, without modifying the video or subtitle files.I reproduced the same behavior using the HTML5
Its a bug. My father and I are running IPhone SE3s. His just updated to IOS 27 while mine is still at 26.3.1a. I do not have that issue while his phone have. Only fix is to off and on the silent switch. This is definely a bug from the latest update.
*Exact* same problem - no VPN enabled on Mac, nor VPN on iPhone 18 Pro - nothing out of the ordinary, just noticed that my contacts created last week on my macbook were not showing on my phone. Which led me here...So, I created a few test contacts within my Apple/iCloud enabled account, and this is really bad, Apple - please acknowledge there is a problem and fix it. AATEST AATEST - created on Mac OS 27.0.1ABTEST ABTEST - created on iCloud.comACTEST ACTEST - created on iOS 27.0.1iPhone: shows ABTEST & ACTEST (not AATEST which was created with MacOS)Macbook: shows only AATEST (neither iPhone- or MacOS-created contacts show)iCloud: shows only ABTEST (neither iPhone- or MacOS-created contacts show)Between this and the recent iOS 27 Siri "enhancements" that have made tasks even slower, I'm not long for the Apple world if this is the level of QA your teams are finding acceptable.
I am a partly ambidextrous person. For example, I use the Mac mouse on the left hand.Can you help Readers understand what about the iPhone User Interface is so right-hand centric?
devjarek ~ "To request an accessibility enhancement, share your story about using the accessibility features of Apple products, or offer other accessibility feedback, email the Accessibility Feedback team (
[email protected])" ...Source:How to contact Apple for help with accessibility features - Apple Supportõ¿õ¬
If you don't have an Apple Watch, I'd guess your problem is different. You'll probably do better if you start your own thread. Be sure to mention in it that you don't have a Watch.
Welcome and thank you for reaching out. 🤗First, try the following steps:Disable any VPN connections and restart your iPhone or tell Siri: "Restart".Learn how to update your iPhone to the latest version of iOS.Learn what to do if your iPhone won’t update.Sign in issue:Learn what to do → If you can’t turn on or sign in to iMessage.Connection issue:Learn what to do → If you can't send or receive messages.Need more help?Contact Apple Support if you still can't send or receive iMessagesContact your carrier if you still can't send or receive SMS, MMS or RCS messagesAdditional help:United States: 1-800-APLCARE.Contact Apple Support.Get Support.Good Luck! 👋🏼😉Smiliñ 😎 Brian | Community Volunteer
Not every issue an individual encounters on their device can be attributed to an iOS update. iOS 27 or later may have coincided with what you are experiencing, but that does not mean the issue was triggered by iOS. Coincidence in timing is not, by itself, evidence of causation. If the update itself were the root cause, then every device running that same version of iOS would exhibit the identical problem. In such a scenario, the forums would be flooded with countless posts reporting the same malfunction, creating an unmistakable wave of complaints that no one could possibly overlook. The absence of such widespread reports strongly indicates that the issue is not a general, system-wide problem with iOS 27 or later, but rather something specific to the individual device, its configuration, installed apps, settings, hardware, or another interacting factor. In short: iOS 27 or later may be a coincidence in timing, but there is no basis to conclude that iOS itself triggered the problem simply because the issue appeared after the update. See what each update does: About iOS 27 Updates, About iOS 26 Updates, About iOS 18 Updates, About iOS 17 Updates, About iOS 16 Updates, About iOS 15 Updates, About iOS 14 Updates, About iOS 13 Updates, About iOS 12 Updates, and so on...
The removal of this app significantly frustrates me. The walkie talkie app was actually used by me regularly and a family member. Said family member had a fall and didn’t have their phone on them and they were able to quickly walkie me to come help them. For that reason ALONE the walkie talkie app should be left on the Apple Watch even if not a lot of people use it. Apple claims their watches are about “health” but than go and remove an app that essentially works like a life alert for older people?? This is the kind of thing that’s makes me hesitate when I think about “upgrading” an Apple device. These tech companies don’t care about the consequences to their decisions and it’s extremely frustrating. Apple, please bring walkie talkie back. I think if you promoted the app more. More people would use it like me who have found it to be an essential tool in daily life. Now you just go and take it away without any care in the world. Thanks AGAIN Apple!!! I truly wish there were better alternatives!!!
I have the same issue on my 2024 M4 Mac Mini (32 GB RAM, 2 Tb SSD). I did a clean install of MacOS 27.0.1 without restoring, so there should be no conflicts with older software and startup items. I'm still having the same issue with video playback and Dock malfunctions. Internal or external speakers make on difference. This OS feels like an early beta release. Time to restore my 26.7.1 backup.
THIS!!!! ^^ I was finding that if I select numerous items at one time to drag, I would only be able to drag all but ONE of them. So, if I select 3, only two go. If I select 5, only 4 would go. There is one always left behind. I went through safe mode. I went through creating a secondary login to test it. Nothing worked. BUT.....Changing the view from icons to list view WORKS! Thank you for this!!!! It was driving me crazy!
I contacted Netflix live chat as the problem occurs on Netflix and Youtube only. (I have no problem on Prime)They say this issue is related to Apple and that Apple needs to develop a new update to fix the problem. (Apparently, Safari 27 or Sequoia 15.7–15.8.2 didn’t work well on the 2020 MacBook.) I don’t know if this helps… (No, not really, because there’s nothing I can do but wait—I’m not even sure if Apple is aware of the issue.😮💨)And I agree this is NOT professional.
Glad to know I’m not the only one! Apple absolutely MUST fix these critical bugs; I’m seriously thinking about leaving the Apple ecosystem because of this! Nothing like this ever happened to me when I used Android!As soon as I have time I’ll try visiting an Apple Genius, though I was hoping to resolve a problem like this on my own...
Seeing Smart-3D connected says the CONTROL pathway is connected and working.You ALSO want to see that the Audio pathway is connected.Settings > Accessibility > Hearing devices ...you should see your hearing devices listed and status showing as "connected". Any other status may require that you re-pair your Hearing Aids directly with the iPhone software to complete the audio path.Use hearing devices with iPhone - Apple Support
Welcome and thank you for reaching out. 🤗You cannot update an iPhone 7 using cellular data. Apple only supports major iOS updates over cellular on 5G-capable devices (iPhone 12 and newer).To update your iPhone 7 to iOS 15.8.8, you will need to connect to a Wi-Fi network or update it using a computer via iTunes or Finder.Alternative Methods to Update Without Wi-Fi:If you do not have access to a traditional Wi-Fi network, you can try these alternatives:Use a Personal Hotspot: You can connect your iPhone 7 to a Wi-Fi hotspot broadcasted from another phone or a mobile router. Your iPhone will treat this as a standard Wi-Fi connection and allow the update.Update via Computer: Connect your iPhone to a Mac or PC using a USB cable. You can then use iTunes (on Windows or older macOS) or Finder (on newer macOS) to download and install the update using your computer's internet connection.If you need more help, contact Apple Support directly.Good Luck! 👋🏼😉Smiliñ 😎 Brian | Community Volunteer
"I'm also very unhappy with the song information and controls at the bottom of the window, obscuring the bottom songs, when there is perfect available blank space at the top of the window, At least give us the option to move it."-------Report this to Apple:Take a screenshot, and forward it to Apple, informing them of this part of the GUI. Send it here:
[email protected] "Capture a Portion of the Screen":Go Here: Take Screenshots or Screen Recordings on Mac - Apple SupportScroll to: Take pictures or screen recordings using ScreenshotUse this Feature: Capture a portion of the screen
I work for Apple and returned my ultra 4 because of this issue. Got a new one and have the same issue. Thought maybe it was hardware, but after doing some browsing I’m seeing lots of people with this issue. Will ask the techs tomorrow for their opinion. I assume since it’s so widespread it’s gotta be a software issue.
Cellular calls and FaceTime calls use completely different technologies and should not be treated as the same type of call.A regular cellular call is carried over your mobile operator’s cellular network. It does not depend on your Internet connection or Wi-Fi. The quality of a cellular call primarily depends on the strength, availability, and quality of the cellular network in your location, as well as network congestion and your carrier’s coverage.FaceTime Audio/Video calls, on the other hand, are Internet-based calls. Their quality depends heavily on the speed, stability, latency, and reliability of your Internet connection, whether you are using Wi-Fi or mobile data. A weak or unstable Internet connection can result in poor audio, video freezing, delays, or dropped FaceTime calls.Therefore, if you are experiencing poor sound quality during a regular cellular call, troubleshooting your Wi-Fi or Internet connection is unlikely to solve the problem. First, check that your iPhone has a good cellular signal and that you have sufficient signal bars. Try moving to an area with better coverage and see whether the call quality improves.If the problem persists even with a strong cellular signal, it could be related to network congestion, local tower issues, carrier configuration, VoLTE/5G calling, or other carrier-side problems. In that situation, contact your cellular service provider and ask them to check your line, network coverage, and calling service.In short:📱 Cellular Call → Cellular network → Internet not required🌐 FaceTime → Internet connection required📶 Poor cellular-call quality → Check cellular signal/carrier📡 Poor FaceTime quality → Check Wi-Fi/mobile-data connection
Some additional information would help in better understanding your issue. Please provide your iPad model and storage (32GB, 64GB, 128GB, 256GB or more) and installed version of iPadOS.This information will help contributors to better understand your specific situation.
Hi, I have the same problem, re-installed app, added rosetta, just in case.Maybe a problem with .gov website?I have checked my logs, found the following:"2026-09-26 19:03:30.265 - Warning: Timeout waiting for response from web server."This may explain the above, but nothing on the .gov website to say their web server is down......
Thank you so much! It actually worked! The live text was enabled but somehow wasn’t working. So I powered the phone off and then was working. Thank you again!
Your report that Siri displays “Uh oh, something’s wrong. Please try again” and that Extend and Reframe in Photos do not function is useful information, although these symptoms alone do not establish their cause.Apple states that Siri AI (Beta) is available on Macs with Apple silicon running macOS 27 or later. Your M5 MacBook Air therefore meets the stated processor requirement. Siri AI also requires the device language and Siri language to be the same supported language, and the Apple Account must be in an eligible region. Apple: How to get Siri AIOpen System Settings >> Siri and check exactly what options are displayed. If Try Siri AI (Beta) is available, complete the setup shown there. If Siri AI has already been enabled, check whether it has completed its download.Also check System Settings >> General >> Language & Region and confirm that the device language and Siri language are the same supported language. If the Siri language was recently changed, Apple says Apple Intelligence may remain unavailable until the new language has finished downloading. (Apple Support)Check System Settings >> General >> Storage as well. Apple states that Apple Intelligence requires additional storage for its on-device models, up to 14 GB on some newer Mac models and up to 8 GB on other supported Macs. (Apple Support)Since you are running macOS 27.0, open System Settings >> General >> Software Update and check whether a later macOS 27 update is available.Apple identifies Extend and Reframe as Apple Intelligence features in Photos on Mac. Their failure is therefore relevant to the diagnosis, although it does not establish that they have the same cause as the Siri problem. Apple also notes that some Apple Intelligence features use server-side models and may be subject to usage limits. Apple: Editing basics in Photos on Mac (Apple Support)I would check these items before making further changes to Siri or Apple Intelligence. If all of them are correct, the next step should be to determine whether Apple Intelligence itself has completed setup and whether other Apple Intelligence features work, rather than continuing to reset Siri.
FWIW, I am no longer running Tahoe, I am on macOS 27 Golden Gate, so I can only test in the newer OS.I can tell you that the pinch gesture to summon "Apps" WORKS here.
I can confirm this worked for me. I faced the exact same issue and i unpaired my old apple watch as it wouldn’t go upto watchOS 27, and lo and behold the alarm now rings and vibrates.This is 100% and update issue, unlike how someone mentioned that its device specific, and can’t be attributed to the update.
This might not be the case.There are a number of people reporting, me included, that Apple Pencil / Pencil Pro is not working since upgrading to iPadOS 27.Reports of Resetting All Settings might cure the issue.
Try this If your M1 Mac Mini is connected to an external display via HDMI or DisplayPort, macOS 27 has a specific bug that breaks video playback when audio is routed to certain primary monitors.Open System Settings and go to Sound.Under the Output tab, temporarily switch your sound output away from your main monitor (e.g., switch to Mac Mini Speakers, a secondary monitor, or a pair of headphones).Test a YouTube or BBC iPlayer video to see if playback immediately resumes. For me, on another Mac type, video playback is working just fine
How much available disc space do you have? Have you trashed your preferences? Have you tested for this problem across different Projects, different Libraries?
What format is native footage? MtD
I see quite a few similar threads in this forum from folks experiencing the same problem.I don't think anything will help until Apple fix whatever they have changed/broken.
Hello~ See the link below…If you can't redeem your Apple Gift Card, App Store Card, or App Store & iTunes Gift Card - Apple SupportContact Apple Support - Apple Support<<< Click here.You will need to contact Apple. Many scams abound and due to this I purchase my Apple Gift Cards here…Apple Gift Card - Apple~Katana-San~
Thank you, I managed to erase it & restore so all good thanks for comments
amd1 ~ What model of iPhone is it?...Settings > General > About > Model Nameõ¿õ¬
Please understand that the Apple Support Community is a user-to-user technical forum. Contributors here are all end-users, just like you. Other than the site Moderators, Apple neither monitor nor participate here. As such, if you anticipate that Apple will see or act upon your posts made here, you will be disappointed. However, Apple does invite submission of constructive comments via its Product Feedback portal:Feedback - iPad - AppleWhile you are unlikely to receive a personal reply from Apple, we understand that all submissions are logged, analysed and forwarded to the appropriate team(s).
I am not using Xcode for pairing. I am following this guide from Apple SupportPrepare Apple TV in Apple Configurator for Mac - Apple Support
We encountered this exact issue yesterday. My partner locked herself out of her iPhone 13, and we encountered error 1109 about halfway through the restore.Mobile signal coverage is terrible where we live (rural England) so we couldn't try the hotspot method.We tried:VPN - It didn't work.via iTunes - It didn't recognise the device.via Apple Devices - Recognised but errored at halfway.Eventually, I changed the DNS to Google (8.8.8.8 / 8.8.4.4) and tried again... and it worked. I have no idea whether or not changing the DNS solved it or it if was just plain dumb luck but this did it. So final working method for us was:Windows 11USB A to Lightning (non-official cable)Connected via WiFi VPN OffDNS to 8.8.8.8 / 8.8.4.4So after 4 hours of messing around it was finally done.Apple, you guys are awesome, but this whole process is terrible and seems to be affecting so many users, ya need to do better.