You are not the first one having this issue with iOS 27.
2. I've seen other users using the "On my iPhone" location (instead of iCloud) losing their events with this update.I've reported the issue to Apple. Please also submit a report so that this issue gains visibility: Feedback - Calendar - Apple.
That is not the message you were reporting earlier. See the first solution in my first response to you.
Read this article about deleting and recovering photos and videos on iCloud.comDelete and recover photos and videos on iCloud.com - Apple SupportAnd this support article —> Delete photos on your iPhone or iPad - Apple Support which notes, "If you want to permanently delete your photos or videos, you can remove them from the Recently Deleted album. When you delete a photo from this album, you can't get it back.""Permanently" means "permanently", with no chance of recovery. If you kept them on a separate backup device then have a look there.This post by ASC contributor Lawrence Finch includes a list of places you can check where you may still have copies of photos.Recovery permanent deleted photos - Apple Community
Normally, not. However, you may want to check whether an older compatible version of the app in question is available for download. See also the following user tip by SravanKrA: https://discussions.apple.com/docs/DOC-250008171Otherwise, you would have to investigate whether a different (but similar) app with lower system requirements exists.
Unchecking worked, sort of. All of MY music is gone but my iPhone is full of the junk Apple gave me (e.g. the U2 album, etc). How do I get rid of that?
Thanks, but I have that set to “everyone” on all devices when I try this. It still prompts for the code and then the entry fields disappear.
Click here => Apple Service and Repair for iPad - Apple Support
Hi, thank you for your reply.How much storage do i need on my Iphone 13 for this? I only have around 8GB remaining and i am using 55.4/50gb with icloud storage. Do i buy more icloud storage and free up some space in my main storage too?
You're welcome, glad it worked out.
per google Errors 06A6.0000 and 132F.0000typically occur during an iOS update or restore attempt via a computer (using Finder, iTunes, or the Apple Devices app) when the process fails partway through—frequently linked to low local storage space, a corrupted software payload/Cryptex installation step, or a USB cable/connection drop
Not sure who you are addressing. Apple is not here to see your request, this is simply other users who would not be able to put it back even if they wanted to. If you want to let Apple know how you feel, then sending Feedback to them is what you want to do so your concerns will be read. Feedback - Watch - Apple
What exactly makes you think there is a hacker? Because of all the security features Apple has around its equipment this is incredibly costly and difficult to achieve —> https://security.apple.com/blog/memory-integrity-enforcement/ Much more likely is an account may be compromised, giving another user access to your account on your hardware. However, even account access is surrounded by a number of security features though it is more easily compromised by hackers convincing people to reveal security information, or users not bothering with implementing Apple’s security features.Read this article if you think your Apple Account has been compromised. --> If you think your Apple Account has been compromised - Apple SupportUse the information in this article to check your Apple Account device list to find where you're signed in --> Review devices signed in to your Apple Account - Apple SupportRelated materials:Personal Safety User GuidePersonal Safety User Guide - Apple Support > open the Table of Contents and review the articlesAn article with general information about security and your Apple ID --> Security and your Apple Account - Apple SupportContact Apple for help with Apple ID account security. This page provides country-specific Apple Support contact information ➞ Contact Apple Support - Apple Support
I think I may know why it doesn't find them. Quite simply, it doesn't have old information available to tell it where to look.When each new version of macOS comes out, I rebuild everything from scratch on a new volume so I can test all of my apps to make sure they're working before committing to the new OS. Once they do, I can simply delete the entire volume the previous OS was on.But, what's likely missing is the previous prefs it would use to know where to look. In the user Library folder, there's a TurboTax 2026 folder in the Application Support folder. That one mainly (going by the file names) holds the licensing data. I'm sure if I moved that folder out to the desktop and launched TT, it would think I haven't registered the software yet.In the Preferences folder, there's the file, com.intuit.turbotax.2026.plist . I tried moving that one to the desktop to see what would happen, but TT still knew where the data files were (once you've selected your data in a Finder window, it always remembers after that). So I'm not sure yet where it's hiding that info.
That's already off. But Xfinity's filters have it under control now. Instead of getting three or four spam calls (from the same three spoofed area codes) every day, it's now down to only two or three a month.
Spent almost two hours with a senior advisor. Removed a lot of what appeared to be old stuff and cleaned out the Menu Bar. Still failing.The next step is to download a clean copy of the latest OS. I'll do it when I get a window of time and post the results.
The Apple Pencil (2nd generation) is not compatible with the iPad Pro (M5), so it will neither pair nor charge when magnetically attached to that iPad.According to Apple's compatibility documentation, the iPad Pro (M5) supports two Apple Pencil models:Apple Pencil Pro: Supports wireless pairing and charging through the magnetic connector.Apple Pencil (USB-C): Pairs and charges using a USB-C cable. Its magnetic attachment is for storage only.You can verify compatibility here: Apple Pencil compatibility - Apple SupportSince you mentioned that your Apple Pencil previously worked with another iPad Pro (M5), I suspect you may actually have an Apple Pencil Pro rather than the 2nd-generation model.
also, all if this superfluous stuff drains my battery! my battery life was completely fine YESTERDAY before updating 🤦🏻♀️🤦🏻♀️🤦🏻♀️
ref:If your Mac starts up to an Apple logo or progress bar - Apple SupportA SafeBoot Start up your Mac in safe mode - Apple Support may get past some anomalies to investigate further.Use macOS Recovery on a Mac with Apple silicon— run the first AIDUse macOS Recovery on a Mac with Apple silicon - Apple SupportHow to reinstall macOS Recovery (both M1/M2/M3/M4 and Intel) — How to reinstall macOS - Apple SupportIf it is a hardware issue take it in—In or out of warranty you can get a free over the counter 'Apple Service Diagnostics' test /assessmentMake an appointment for a "hardware issue"Genius Bar Reservation and Apple Support Options - AppleOutside the USAContact Apple Support - Apple Support
It also depends on the laws in your country. In mine (UK) the contract is with the seller, they chose the courier, the seller must send a return label, replace it or refund it, and they claim damages from the courier. In your country it may be UPs who must replace it. Check your laws.
Remember that you also usually have the option of just replacing the battery, which is much cheaper than buying a new phone. One thing I would note is that the older your phone is, the less trade-in value it will have. So if you're looking for a "reason" to buy a new phone, that would be the one I would use.
Yeahh that’s the problem i don’t know why it is showing as purchase is not completed, I am 200% sure that amount got deducted from my bank account and also in my app it is showing that the same auto debit mandate had been deducting the amount from the past 3 months.Also i have transaction id as wellIf i tap on complete purchase it is taking me to payment page to create a new autopay
I bought Logic Pro on 17th September 2012 - see the image attached showing the icon. I have been updating when updates were available ever since - right up to 12.
4.
- Thanks for your help. I will continue to get Apple to make previous downloads available.
Nonesense. You never purchased watchOS, only licensed it. And you agreed to the terms. https://www.apple.com/legal/sla/docs/watchOS27.pdfQuote: Apple, at its discretion, may make available future watchOS Software Changes for your AppleWatch. The watchOS Software Changes, if any, may not necessarily include all existing softwarefeatures or new features that Apple releases for newer or other models of Apple Watch. The terms of thisLicense will govern any watchOS Software Changes provided by Apple that replace and/or supplementthe Original watchOS Software product, unless such watchOS Software Change is accompanied by aseparate license, in which case you agree that the terms of that license will govern. (Bold mine)Apple also gave no warning that updating to os27 would remove the Walkie-Talkie feature (negligence) and has not provided an alternative for the Walkie-Talkie feature.
Yes, there are alternatives. You can still make Facetime calls which can be initiated by voice. You can send a text or audio message, also initiated by voice. I get that you don't like them but that doesn't change the fact that they exist.
i updated to 27.2.whatever and guess what it still takes like 176 years to open a single document that is less than 30 KB. I don't think it's my machine, I think it's the geniuses who designed whatever this pOS is.
So when I find my phone, watch or ipad it silences upon picking up the device. That seems resonable. I misplace my Mac and just wanted to locate it, not wake everyone up in the house.
The people responding to you here do not work for Apple. We have no control over charges made to your account. While you are welcome to contact Apple itself it is unlikely Apple would waive any charge in this instance. You will need to do as has been provided in previous replies. If you do not receive a refund then you will have to regard this as a lesson to read fine print more carefully.
In light of all that has been suggested / attempted and sadly not resolve Below is what is suggested to present to Apple Support Hello Apple Support,I urgently need technical assistance recovering access to an Intel-based iMac running macOS Sequoia 15.1.Our primary concern is preserving all personal data on the internal drive. Erasing the disk or losing the existing data is absolutely not an option.Description of the problemWe changed the password of the only user account while logged into macOS.The new password was entered twice and accepted by the system. However, immediately after restarting the iMac, the new password was rejected.We also tried the previous password, but that was rejected as well.We subsequently started macOS Recovery, where Macintosh HD is locked by FileVault and the system requests a FileVault recovery key.Additional technical detailsKeyboard layout possibility: The password contained the special character #. We did not manually change the keyboard input language during the password change. However, we suspect that the keyboard layout may have changed automatically, potentially causing a different character to be entered than intended. We would like to investigate whether this could explain the password problem.No alternative administrator account: There was only one user account on the iMac. There were no additional administrator accounts or other FileVault-authorised users.Target Disk Mode tested: We connected the iMac to another Mac using Target Disk Mode. Unfortunately, access to the encrypted volume still required authentication, so this did not resolve the problem.No recovery key available: We never deliberately created, recorded or saved a FileVault recovery key. We have also checked the Passwords app on our iPhone without finding one.Apple Account: The iMac is associated with our Apple Account, but macOS Recovery does not offer an Apple Account sign-in or recovery option. It only requests the FileVault recovery key.Assistance requestedWe would appreciate an investigation into the following:Whether the keyboard input layout could have caused the password entered during the change to differ from the password we subsequently attempted to use.Whether Apple Account-based FileVault recovery was enabled when FileVault was originally configured.Whether any recovery key might have been stored or escrowed through an Apple-supported mechanism.Whether there are any additional supported methods of unlocking the encrypted volume without erasing or modifying the existing data.Whether a senior macOS technical advisor or FileVault specialist can review this particular situation.We understand that FileVault is designed to protect encrypted data and that recovery may be impossible without a valid authorised credential or recovery key. Nevertheless, we would like to exhaust every legitimate recovery possibility before accepting any loss of data.
IMPORTANT: Please do not recommend erasing the Mac, formatting the drive, or reinstalling macOS in a way that could destroy the existing data. Our priority is data recovery, not simply restoring the iMac to working condition.Thank you for your assistance. We would be extremely grateful if this case could be escalated to someone with advanced knowledge of FileVault encryption and Intel Mac recovery.Yours truly ( Your Read Name and contact information )
You didn't tell us much about exactly what you're doing-- what mode you're in, for instance. For one thing, the menu item File>Export>Export Frame to Pictures doesn't work in Edit mode. Are you one Edit Mode or Preview Mode or what when you try this? Here you can see that I have not entered Edit Mode:
I would continue to pursue the issue with Goldman Sachs. If you’ve not changed any emails associated with your Apple Account or your Apple Card account, it’s a Goldman Sachs issue. If you’ve not already done so, remove the Apple Card from your Wallet app. Restart your iPhone and then add the card back to your Wallet app. This is known to reset some settings associated with your account. I can’t say for certain it will have any effect on the email settings. Sorry.
have the same model right now running 27.2.1just connected my usb-c 2 in 1 sdcard reader and they both show up as expected as unknown as name in the file appso it's not likely to be a general software issue usb-c has great many pinsso a hardware defect to some of the pins could be an explanation to the issue you face, if the power pins were still solid connected it would still chargethat being said I would not expect the usb-c port in the ipad to be able to power an external harddrive that rely on getting it's power over usbsd cards require much less power
the itunes on my 2011 computer is itunes 12.8.3.1 and the OS on it is High Sierra 10.13.
6. is there a way i can convert it on this 2011 computer i have? thank you
macOS automatic (overnight) updates are intentionally paused when a major new operating system version is released. In other words, you have to declaratively opt in to a major upgrade (macOS 27), and until you do so, automatic updates for the older version of macOS (Tahoe) will not be applied to your Mac. Until you choose to upgrade to macOS 27 Golden Gate, you will need to update manually to keep macOS 26 Tahoe current. If you want to continue running macOS 26 Tahoe and keep that up to date, but skip the upgrade to Golden Gate for now, then to update to the latest version of Tahoe do the following:Open System Settings > General > Software Update.Click the (i) next to Other Updates under Also Available.Select the update(s) you want, which may include both macOS Tahoe and Safari updates.Click Update Now.Once you upgrade to Golden Gate, if you leave Automatic Updates active then macOS 27 updates will be installed overnight, automatically.Why the updates haven't auto-installed overnightYou are being offered a major next-generation upgrade (macOS 27.2 Golden Gate) alongside a minor point release (Tahoe 26.7.2). When a major upgrade becomes available, Apple's automation halts background deployment of minor updates to avoid forcing a system path you might not want.Note that the above is consistent with your Mac being compatible with Golden Gate. If you had an older Mac (Intel) that could not run Golden Gate, then you'd have automatic updates for Tahoe delivered. See: Update macOS on Mac - Apple SupportIncidentally, probably since the last time you visited Software Update, even newer versions launched. Earlier today, macOS 27.2.1 and macOS 26.7.3 were made available for download.
Hey Grant Bennet-Aider,Yes, I do see that "awkward, wonky device name ...." Did you look at the screen grab that I included ? At the top of the Disk Utility side bar it lists my Internal Mac Hard Drive. I do NOT want to mess with that. Below is the external hard drive. I did already erase it as per Apples instructions - https://support.apple.com/guide/disk-utility/erase-and-reformat-a-storage-device-dskutl14079/mac. The problem is that now it has been erased I cannot back up my Mac to the External HD G Slim. Disk Utility can see the External G Drive slim, it lists it in the side-bar menu but when I select Back up it states that the G Slim drive is not available. Notice that on your screengrab - you have little down arrows next to the wonky device name. On my screengrab and disk utility there aren't any down arrows. So I cannot access the G drive Slim. So any other suggestions, please ?
Hello,Short Answer, is you cannot. There is no way to add font sizes to the dropdown.Long answer:Depending on what macOS version you are running it may or may not be possible to set a custom font size.If you tap on command+t to bring up the Font Palette it may let you type in the specific font size in the font drop down there. But it's hard to get it to respond, as it keeps focus on the email message and not the font palette. I have been able to get it to respond by maximizing the font palette to full screen, then double clicking on the font size drop-down let's me type a blue in there. then you press the green bubble again to return to regular size and hit enter and any selected text will then change to the entered font size. Not the easiest thing to do, but it works. Alternatively, writing the email in a word process such as Pages or Word and the copying it into the mail message will preserve the fat size, and the word processor should offer the full range of font sizes.
Thanks for your instructions Joe. (I have done it before but I tend to forget when it's not been for a long time).I made an FCP preset and this is what I got . . . I realise the effect can be increased or reduced but I don't think it's quite right for high-shutter-speed strobing.
SSL to TLS:In June 2015, Researchers at standards organizations formally declared that Secure Socket Layer (then SSL 3) Internet Encryption was not nearly as secure as was thought, and needed to be replaced. SSL Versions 1 and 2 had already been deprecated by that time,Early versions of Transport Layer Security (TLS) were already available in many Browsers. Over a remarkably brief period of time, sites tightened requirements for what was acceptable for encryption, and refused connections from browsers that could only offer SSL 3.Apple issued Safari version 9 in 10.11 El Capitan version of MacOS, which included an early version of TLS encryption. Safari 9 was later provided by Security Update into the two previous versions of MacOS. 10.10 Yosemite and 10.9 Mavericks, PROVIDED you applied all available software updates.MacOS versions older than those can not make secure [httpS:] connections on the Internet, because by 2016 standards, your proffered encryption (SSL) is considered inadequate.
You are welcome and thank you for the feedback Just to compare notes I an using both the M4 Mac Mini and the M6 Mac Mini The M4 is used most to Live Streaming to a 50" UHD 4k TV while the work horse for daily usage is the M6 machineAgree, no rush and think things over at your leisure before moving forwards 🦉-53
I attempted to resolve this issue by resetting network settings, yet nothing changed and the problem persists. It is a severe issue with the speaker, and after updating to 27.2, no solution is available. Could anyone suggest something that might fix the problem?
That's a good question, and I should clarify the distinction.Yes, Touch ID and Apple Watch Auto Unlock are two separate authentication methods, although both operate within Apple's overall security framework.Here's how to understand the requirements:48 hours: If you haven't unlocked your Mac for more than 48 hours, Apple requires you to enter your account password rather than relying on Touch ID.156 hours (6.5 days): Apple also documents a password requirement when 156 hours have elapsed since the last password entry and biometric authentication hasn't been used within the preceding four hours.However, these are documented biometric security requirements, not a published expiration schedule for Apple Watch Auto Unlock.Apple's documentation specifically states that after manually entering your password following startup, a restart, or logout, your Apple Watch should subsequently unlock your Mac when it wakes from ordinary sleep.Therefore, I would not expect you to have to enter your password every 24 hours simply because you're using Apple Watch Auto Unlock.Unfortunately, Apple doesn't specify a separate maximum period during which Apple Watch Auto Unlock remains available, so I wouldn't want to promise that it will necessarily work for 6.5 days.My recommendation: Continue with the troubleshooting steps outlined earlier. If you consistently encounter this problem after approximately 24 hours, even though your Mac hasn't restarted or logged you out, I would investigate it as a possible Auto Unlock reliability issue rather than assume it is a normal security requirement.For reference, Apple's documentation is here:Apple – Unlock your Mac with Apple WatchApple – Biometric Security RequirementsI hope that clears up the distinction!
Then you need to:Open the Calendar appTap the Calendar icon on the bottom of the screenUncheck the option for Siri Suggestions. That should do it. Once you uncheck that, the events suggested by Siri will be immediately removed. It is a feature in the Calendar, but you certainly don't have to use it and can be easily turned off. Apple also added another feature in iOS 27.2 to make it easy to exclude apps that Siri can use for information. For that, go to Settings > Siri > Excluded Apps, and add any app you wish. Those apps will then be excluded from Siri, Search, and Suggestions. And for other Suggestions that appear in Search, on Home Screen and Lock Screen, you can go to Settings > Siri > Suggestions and turn off the global settings there or individually for the apps you choose.
Yes – server side and client side are not the same thing. 'Deprecated on the server side in Big Sur' (as I stated) means that you cannot set up an AFP server on a Mac running Big Sur or later. The client side (your Mac accessing an AFP server) was fully deprecated in macOS 27 Golden Gate, up through Tahoe you could still connect to a server running AFP. The default networking protocol was changed from AFP to SMB in OS X Mavericks (2013). The writing has been on the wall for AFP for a long time.
I am in Manitoba and I am having the same problem. Anything I had imputed in my calendar is a hour later than it is intended. I’ve tried doing time zone over ride, updates, turning off and on. It hasn’t changed.
Thank you OldToad for your thoughts!Okay! On Apple Website - https://support.apple.com/en-gb/guide/personal-safety/ips129f51353/web it says under “Manage iCloud Shared Photo Library Settings on iPhone & iPad”, “When you contribute photos and videos to iCloud Shared Photo Library, they move out of your Personal Library and into the Shared Library (iCloud Shared Photo Library)”. Assuming my Personal Library is the same as the Main Library/System Photo Library, why do I have to be in the Main Library in order to see the photos in the Shared Library if they are no longer in my Personal (Main) Library? It would appear to me from the above statement that now there are two different and separate libraries, My Personal Library which is my Main Library/System Photo Library and the Shared Library. So, if the photos in my Shared Library are not in my Personal Library, why do I have to be in the Main Library in order to see the Shared Library photos? The Shared Library is now a separate library from my Main Library.If I am in an Album in my Personal (Main) Library and I switch to the Shared Library, it says, “No Photos & Videos”. I have to be in my Main Library. If I am in my Shared Library and I select an Album in my Personal (Main) Library, I get the same message, however, if you click the Info icon, it will show that there are xxx number of photos in that Album, the date range taken, the total size of all the photos and it will show you a map of where those photos were taken if you had data turned on when you took those photos. So, the Photos App knows there are photos in that Album, so why can’t we see them??? This makes no sense.And Yes, I have written to Apple twice about this. They will not respond to feedback, so I am here to see if this makes any sense to anyone here.Furthermore, when in the Shared Library, if you click/choose things like Recently Saved or Videos under Pinned or certain things in Collections (and you have some of those in the Shared Library, they will show. If these, why not Albums???Thanks!
etrecheckPro is the best troubleshooting app out there and was created by a highly respected member of these communities.It is perfectly safe and does not harvest any personal data.It may not be on the App Store but that is no guarantee of safety . . . there are many dodgy apps on there simply because Apple has accepted the creators' cash . . . if you are willing to pay exorbitant amounts you can get almost anything accepted.etrecheckPro is the gold standard of diagnostic apps and is completely free, though you can pay to unlock some extra features which you won't require.
Have you reported this to Apple Support? Apple and Apple Support do not participate in the communities here. They only moderate our posts to insure all user guidelines are followed in regard to content and user behavior. Everyone posting and commenting are just Apple users like yourself. Your comments will not be reviewed by Apple. Please use the link below to report the issue. Product Feedback - AppleApple typically does not formally reply to bug reports.
I do not believe Apple has intentionally removed or changed this functionality in macOS 27.
2. It appears more likely to be a Finder regression or bug.Other users have reported similar behaviour since macOS 27.2: the traditional click-pause-click method of renaming a file no longer works in List or Column view, although it continues to work in Icon view.The fact that you have experiencing this on both an M4 Mac mini and an M1 Pro MacBook Pro makes a hardware-specific problem unlikely.In the meantime, there are two simple alternatives:Select the file and press Return to edit its name.Right-click (Secondary Click) the file and select Rename.For anyone unfamiliar with Secondary Click, Apple explains how to use it with either a mouse or trackpad here:Right-click on MacYou can also hold down Control while clicking to bring up the contextual menu and choose Rename Apple's documentation still supports the traditional file-renaming methods, so there is no indication that this is an intentional change. Hopefully, it is simply a Finder bug that Apple will address in a subsequent update.I would recommend reporting it using the Product Feedback which may put this on Apple's radar.
This macOS 27.2 issue affecting symbolic link behavior on SMB volumes has been reported elsewhere online. macOS 27.2 reportedly breaks the "Leave Files in Place" mechanism when the Final Cut Pro library itself resides on the NAS. Under macOS 27.2, Final Cut Pro's internally generated symlinks—used to track external media—are interpreted as generic 1KB modified files instead of valid shortcuts, causing FCP 12.4 to lose track of the asset streams during playback.Because your tests confirm that a local library referencing NAS media works perfectly, you can reportedly bypass this bug immediately without waiting for Apple's patch. Immediate Actionable WorkaroundsMove only your .fcpbundle library package to your Mac Studio's local SSD while leaving all source footage exactly where it is on the NAS.Why it works: This completely sidesteps the macOS 27.2 SMB symlink bug. The local macOS file system handles the tracking links to the external NAS assets flawlessly.Setup: In FCP, select your library, open the Library Properties inspector, click Modify Settings, and ensure the media location is explicitly pointed to your external NAS folder. You can keep your cache local to speed up timelinesFull disclosure, I am passing this along but cannot test personally. I do have an NAS accessed via SMB, and video media stored on the NAS plays fine on my Mac running 27.2, but I do not use FCP. Bugs should be reported to Apple here:Feedback - macOS - AppleFYI, second thread on this today. Here is the first.macOS 27.2 – External media becomes unrea… - Apple Community
And I picked up a few of your templates on the way for my show!
High Sierra and iTunes 12.8.3.1 are theoretically enough to manage even an iPhone 18 Pro running iOS 27. (See the Technical Specifications for that phone.)However, in the last few years, ever since the release of iOS 17 (or was it 18?), I have seen threads from people who ran into problems trying to manage iPhones with the current version of iOS, using High Sierra. I get the impression that the problems might not happen to everyone.Some people claim to have patched around the issue by downloading a suitable version of Xcode, extracting some component from it, and using that component to update iTunes. But that shouldn't be necessary, seems a little bit dicey, and might not even work now (if you're trying to get whatever component is needed for iOS 27).It's a good sign that iTunes offered to download and install an update ... not so great that the installation failed. I do not know if "not currently available" is a temporary thing or a permanent one.
To provide an update: it worked with tvOS 26.6 and 27.0, but tvOS 27.2 is broken once more. Hopefully, a tvOS 27.3 beta with a fix is released soon; otherwise, we will have to shelve several Apple TV units indefinitely. These units were previously on the faulty tvOS 26.4 and are now on the broken tvOS 27.2."Broken" in this case means you cannot pair a factory-reset Apple TV with Apple Configurator.
Resolved itTurn off lockdown modeRun the update normally from system preferencesiOS 27.2 installs correctlyTurn lockdown mode back onThis is a bug in MacOS 27.x... when lockdown mode is enabled, updates fail - could be because it doesn't auto-connect to WiFi in lockdown mode, on most Wifi networks. One of the worst features of lockdown mode anyway.
M6 Mac Mini , M4 Mac Mini , M5 MBA Laptop and M2 Mac MiniEach machine were running Golden Gate 27.0.1 build ( 26A434 )Not issues what so every using the basic System Setting >> Software Update applet So it would seem rather localized and unique to your machines setup
I know why that happened. Because your phone had low storage so your phone's storage doesn't get full so some events got deleted to keep some storage empty as software update would take some storage space.
You could also try Coverr.co and Pixabay.Coverr.coPixabay YouTube
I am experiencing the exact same issue on my SE 3rd Edition so you are not alone - I must admit, I would have thought this kind of issue created by Apple would never happen. I wondered why I kept missing calls! I moved to Apple for reliablity now I'm not so sure! Can't even roll back so hope Apple get it sorted soon. I use the assistive touch to simplify a quick unmute under device once set up or flip the side switch off and on.
Today the videos from the exercise site that wouldn’t work before, started to play on my iPad, and my iPhone. They continue to play well on my iMac.I didn’t change anything that I know of, but perhaps Apple Support, which I enlisted to help solve my playback issues, succeeded in changing something behind the scenes. I hope others are having success as well.
No one here in this user-to-user forum can answer any of those questions. And Apple doesn't read here for feedback or suggestions. You can let them know your thoughts here:Product Feedback - Apple
Can I change the appearance of the calendar back to what it was before ios27
Just keep typing. It will overwrite the suggestion.
From the top of my mind you have to swipe down on the right side of the Dynamic Island to open control centre. Next, all the switches are on the right side which was impossible to reach on 15 Pro Max.Moreover the general direction of gesture navigation is strictly right-hand oriented, be it returning to a previous screen or app switching. I could really go on and on, but the simplest solution would be to just introduce an inverted UI, like a mirror reflection. A non-Max model is somewhat usable but I found myself often switching to my right hand on a 15 Pro Max, something I didn’t have to do even once in my 15 years of Android usage
I’ve tried 99% of the solutions available out there for iPhone 15 pro max and my wife’s iPhone 1
5. The only notifications that are working are in iMessage , no other app at all. The 1% is that I haven’t factory reset the phones, if someone can confirm that factory reset will fix the issue, I will even go there
I know, this is really frustrating. BUT you could try third party walkie talkie apps because those do exist. Just an FYI, if you want to prevent other Apple Watches from updating to 27 just always keep an eye out because even if you turn auto updates off be careful. Because, my SE 3 recently decided it wanted to start downloading the update even though I had it turned off...
Since notifications stopped working after upgrading to macOS Golden Gate 27.0 on your MacBook Air, I would suggest working through the following steps. They are based on Apple Support documentation, as the exact cause is not yet clear.First, open System Settings >> Focus and temporarily turn off any active Focus mode and of sharing across other devices Then go to System Settings >> Notifications, select an affected app, and check that notifications are enabled and the preferred alert style is selected.If only one app is affected, check its own notification settings, too. Restart your Mac and test again.Next, click the date and time to open Notification Centre. If notifications appear there but desktop banners are missing, the issue may be with how alerts are displayed rather than with notification delivery itself.Apple's instructions are available here: Focus settings and notification settings.If notifications still aren’t working, try starting your Mac in Safe Mode and test again. If they work in Safe Mode but not during normal startup, software or processes loaded during normal startup may be contributing to the problem.You can also test notifications in a separate macOS user account. If they work in the new account but not your usual one, the issue may be related to your original account's settings or environment. Neither test identifies the cause conclusively.If the problem persists, check Apple menu >> About This Mac to confirm your macOS version, and note whether the issue affects all apps or only certain ones. That information will help narrow down the next steps without resorting prematurely to resetting settings or reinstalling macOS.
I know you've tried everything but here's what I'd do. Before you do this you must make sure that your Contacts are in iCloud. Do this by opening iCloud.com in a browser and checking that your Contacts are there.1 - create a new contact on iPhone. Check Contacts in iCloud on web to confirm it's synched to iCloud. If not then the problem is your phone, not your Mac. In Settings turn iCloud off and on on your phone2 - Check your Mac. If the nw contact has synched to iCloud but not to Mac then in System Settings turn iCloud synch off on your Mac and then turn it back on again
I understand, but I didn’t have to go through a multi step re-pairing process, even when I used “Forget Device.”Since there is a Reddit thread of users with various aids who have the same problem after updating to iOS 27, it appears it’s an issue with iOS 2
7. Unfortunately, the provider can’t help with that.
“FYI I did find a solution to this ‘adding songs to playlist’ bug, which is to select the songs you want to add, and then control-click to cursor menu, there is an option to Add to Playlist there. This works and does not add 10 copies of each song.”———-Excellent job troubleshooting here!Report this FIX to Apple:Do your Part: Provide Apple with feedback on this, letting them know about this issue and the fix. Apple may not get back to you directly, but the more feedback they receive on this, the more they will know what is occurring, and what bug fixes to include in updates to come. Apple will know nothing of this, if you don't report it to them.Go Here: Feedback - iPhone - AppleSelect: "Bug Report" for the "Feedback Type"Comment: on what the issue is, and the fix you have come across. Include the URL of this thread.Proceed from there as necessary
iPad 10.2" (2020) 8th Gen 32 GB.
Had the same issue, Streaming don't play, locally stored QT videos don't play, switching to the Mac mini (M1) speakers worked for me, videos play.However why this would happen at all is pretty bad, I just updated to 27.0.1, did not help.I hope Apple can fix this soon, don't want to listen through the small tinny speaker.I'm using a secondary display through the HDMI port
Make sure you sign in with the same Apple Account (Apple ID) that you previously used with the Apple Health app and Apple Fitness+. Your Health and Fitness data, including your awards, achievements, activity history, and accumulated progress, are associated with that Apple Account.Using a different Apple Account may prevent your previously earned awards and achievements from appearing. Once you sign in with the original Apple Account and your Health data has been restored or synced through iCloud, your previously earned awards should become available again.If the awards still do not appear, you can also try unpairing and then re-pairing the Apple Watch that originally earned those awards. After pairing it again with the same iPhone and Apple Account, allow some time for the Health and Fitness data to sync. This can help re-establish the connection between the Apple Watch, your Health data, and your previously earned Fitness awards.
I'm also encountering issues with the apple pencil 2 on my ipad mini (MK7P3LL/A), since update the ipados to 27 it is impossible to draw using Procreate v5.4.14, the pencil works with menues etc. tried another pencil 2 with same issue.Clearly not upgrading my ipad pro as drawing with Procreate is essential for me.
I just felt like complaining. And I want apple to see my complaint. I’m really upset about it I use it daily with my kids. If is easier for them to navigate to the walkie talkie vs to call.
Indeed Walkie-Talkie has been removed under watchOS 27.
Do whatever is in your best interest.
Is it just the action button flashlight that’s a problem? Not changed mine to anything other than flashlight but in standby. It never works. As soon as the screen lights up it works which makes me think it’s not hardware? Although Watch OS 27.0.1 hasn’t fixed it.
Understood, but Apple removed it. So your option is to use another app. This is a user to user only forum. No one here on this user only forum had anything to do with Apple's decision to remove Walkie Talkie. You are welcome to let Apple know what you think using this link --> Feedback - Watch - Apple
Dear WheelieNick,Thank you for these suggestions - I'll try them out.Best wishesMichael
Suggest that you and the other poster follow Owl-53's advice to download and run the diagnostic tool Etrecheck. How to use the Add Text Feature When Post… - Apple CommunityPost the report in a reply in this thread. Etrecheck's report includes no identifying information, you can read it first to verify that. Since a different account does not show the anomaly, it almost certainly is occurring in the original account due to something installed, which Etrecheck should reveal if you run it from that original account. You can also boot into Safe Mode to verify that the problem is gone in Safe Mode, which again would point to something installed as the cause. In that case running Etrecheck is again the best way to identify the culprit.
At least that’s a benefit of having an older watch, I just need to find other poor people to talk with.
I’m going to try your suggestion of resetting all settings. Just waiting on watch update to finish. However , I did just get the alarm to sound. But after nearly 4 minutes of letting the “ alarm “ go off without stopping it. It always sounded immediately. No sure why it’s taking so long to produce sound now without any changes to settings on my end.
I had the same issue when using Windows 11 "Apple Devices" app.I turned off firewall, uninstalled that app and used iTunes to update and then it worked.I didn't have to change DNS. (step 3)These articles were helpful:https://www.reddit.com/r/ios/comments/1j2tipd/iphone_could_not_be_restored_unknown_error_1109/ If you're here, you probably encountered the unknown error 1109 while trying to restore your iPhone from your PC. Many people have faced this issue, so I want to share the solution that worked for me.This problem often occurs on Windows when using the Apple Devices program. In my case, I tried restoring an iPhone 15, but error 1109 appeared, and the device got stuck on the Apple logo screen with the progress bar halfway through.Important Before Starting:If you have an iPhone with a USB-C to USB-C port (iPhone 14 Pro and later), iTunes will not recognize the device in this state or in DFU mode. I don’t know why this happens, but on Windows, you’ll need to use Apple Devices instead.Step-by-Step
Solution:1. Put the iPhone in DFU mode:To do this, follow these steps:Quickly press the Volume Up button.Quickly press the Volume Down button.Hold down the Power button until the iPhone restarts and enters DFU mode.
2. Disable Windows Defender:You need to temporarily disable the Windows Firewall and Virus & Threat Protection.Open Windows Security.Go to Virus & Threat Protection and disable real-time protection.Go to Firewall & Network Protection and turn off the firewall.
3. Change your WiFi DNS to Google:Open Run (press Windows + R) and type: ncpa.cplRight-click on your WiFi network and select Properties.Find Internet Protocol Version 4 (TCP/IPv4) and click Properties.In the section Use the following DNS server addresses, enter:Preferred server: 8.8.8.8Alternate server: 8.8.4.4Save the changes by clicking OK.
4. Restore the iPhone using Apple Devices:Connect your iPhone to the PC.Open Apple Devices.Select Restore iPhone.The process should now complete successfully.This issue can also be resolved by visiting an Apple Store, as long as your warranty is valid. However, not everyone has the time to do that, so I hope this guide helps those facing the same situation.
You are not imagining it, and you have not simply overlooked a setting.Apple's current documentation continues to describe a trackpad pinch gesture for opening Apps, but the current Trackpad settings documentation does not show a separate Apps or Launchpad option under More Gestures. In macOS 26, the previous Launchpad experience has been replaced by the Apps interface.If your usual gesture has stopped working, try Apple's currently documented Apps gestures: pinch your thumb and three fingers together. Apple documentation for some current Mac models also describes opening Apps by pinching four or five fingers closed.If neither gesture works, there does not appear to be a separate option in Trackpad settings that you can use to turn the Apps gesture back on. The absence of that option does not mean you have overlooked a setting, because Apple does not list Apps as a separately configurable gesture in the current Trackpad settings.Apple's current Multi-Touch gesture documentation is available here: Use Multi-Touch gestures on your Mac. Apple's current documentation for Trackpad settings is available here: Change Trackpad settings on Mac. Apple also provides information about viewing and opening apps in macOS 26 here: View and open apps on Mac.
I’m also experiencing this problem of being unable to sign in to my iTunes account on my Windows laptop and got the same messages and error code. I am able to sign in to my apple account. I’ve been on two chats with Apple but nothing we tried worked. Yesterday the chat agent advised me that they had recently received many complaints of this type and the tech guys were working on a fix so I was advised to wait and keep trying!😩
The Apple Watch 3 needs an 2.4GHz Wi-Fi connection.About Bluetooth, Wi-Fi, and cellular on your Apple Watch - Apple SupportThe watch has to be erased completely before pairing it, the free storage on the watch has to be at maximum.Erase Apple Watch - Apple SupportThis user managed to pair the Series 3 to his iPhone, running iOS 26:Can’t connect watch to iPhone - Apple Community
I just ran the Find-EwsUsage.ps1 script provided by Microsoft and it reported that roughly 80 out of 400 users in a Microsoft 365 tenant uses EWS for the Apple Internet Accounts Enterprise application. This organization does not use Mac so we must assume that these are the iOS native mail app users. Can I ignore this information and expect these mail clients to continue working, or will they stop working on October 1st?
I don’t understand where I should submit my report. Can you please send me the link where I can upload pictures of my Apple Gift Card and provide the details, so that my issue can be resolved?
My ipad is also behaving very oddly since the update. Apps just quit for no reason, certain websites won’t load properly. I don’t want to be told to restore factory settings. I want Apple to figure out what’s going on and issue a new update to correct it.
…found that if I quit using Private Relay the speed issue is very slightly improved. If I use DuckDuckGo rather than Safari there’s a dramatic improvement in both speed and website performance. By turning off Private Relay and using DuckDuckGo exclusively, even with the DDG VPN it’s like a brand new iPad.
Not a solution but a work round. Open message and open the reply curly arrow. The very last entry on the drop down menu is block contact. Do it and you will see the blocked contact emoji on message when you go back into mail
Hi marcjbannes, welcome to this Apple (user-to-user) Community!Re: "Prevent Books from offloading files on iPad Air" : ... Certainly there is a way to toggle this off and prevent frustrating offloading when using the device to read in a location without WIFI." See Apple support's online article:About purchasing movies, TV shows, music, books, and ringtones from Apple - Apple SupportEg: says:“Any digital media you buy from Apple can be permanently downloaded on to an iPhone, iPad, Mac, or Windows PC.”and“Once downloaded, you can access content without an internet connection, and Apple can’t remove it from your device.”________________________________________________Re: "I don’t want my iPad Air to offload files from Books".Wondering whether you may be short on memory / storage space for smooth operation of your iPad, as well as for storing all your Book files. If so, it is wise to back-up your iPad before making more space available._________If needed: See the article: How to check the storage on your iPhone and iPad - Apple SupportorApple Support also have a video online, that can guide you to check storage, and make more space.How to free up storage space on your iPhone or iPad https://www.youtube.com/watch?v=bwjcYyCneNc ________If needed: See how to : Redownload books and audiobooksAll the best :-)
Thanks for your reply and information. Unfortunately, if I don’t want location data at all I must live with notification every time I use reminders. The notification never goes away if you choose to never track you. If you choose to allow tracking of your location but turn off precise tracking you still get the same message every time. I know I’m not the only one as I have asked others who either don’t care about being tracked and don’t turn off tracking or are irritated as well and use other apps or are still putting up with this limitation of the app since they still find it useful despite this flaw. Reminders just started doing this about 4-6 mi this ago so Apple must be intent on tracking data if they handicapped the program just to do so. Again, feels like a Microsoft product. If one chooses the “never track” option, the app should not look to track you. That is a bug.