iPhone X, 8 Ring Volume is Too Low- How to Fix it

I am an iPhone user. Whenever I try to make or receive a call, I had a problem with Ring Volume which is too low..Many times I  have failed to attend the important calls because of this problem. I have shared this problem with my friend Sherin and she gave me some tricks to fix this problem. Let me share those tricks with you…
Fix 1: Change the settingssettings-app

  1. Open the Settings app
  2. Go to Sounds and Haptics
  3. Scroll and find Ringer and Alerts
  4. Increase the Ringer Volume

Note; if you increase the volume for all sounds on your iPhone, sometimes the ringer volume may be getting into stuck at a very low level.
Fix 2: Turn off Do Not Disturbdo-not-disturb-turn-off

  1. Open the Settings app
  2. Go to Do Not Disturb icon
  3. Tap the switch next to Manual
  4. You will find the switch which will be in grey color. It means that Do Not Disturb is turned off.

Note: When the Do Not Disturb is turned on, your incoming calls, notifications, and alerts will be silenced.
Fix 3: Inspect your iPhone Charging port (Lightning port)charging-port

  1. Use a  flashlight or high-intensity light to detect if there is any dirt, debris is found in the Charging port
  2. If there is any, just use gentle brush and clean it
  3. Your iPhone Volume will be turned up.

Note: Try to avoid using electric charge or anything to brush out the Charging port which may damage the electronics in the bottom of your device
Fix 4: Use Puls to repair your iPhonepuls.com

  1. Visit Puls.com
  2. Click Phone repair
  3. Select iPhone
  4. Select color and model of your iPhone
  5. Select repair which you needs and fill the additional information if any to the technician
  6. Click total cost button
  7. Enter date and time for the repair to be completed
  8. Fill your contact information
  9. Click Submit My Request button

Note: Every Puls Technician is certified and they will be experts in their job.
Fix 5: Use Apple to repair your iPhoneapple-store

  1. Contact Apple store
  2. Go to repair service
  3. Mail your volume issue problem/ call 1-800-MY-APPLE to set up a repair

Note: Apple repairs are covered under 90 day AppleCare Warranty. If your warranty expires, then you can visit Apple’s Support Website.
Other solutions to fix ringer sound issue are as follows:
Fix 5: Reset your iPhonereset-iphone

  1. Press and hold your power and Volume Down buttons simultaneously
  2. Your iPhone will be shut down
  3. Power on your device
  4. Check your ringer volume

Fix 6: Check Ring/Silent Switchring-silent-switch

  1. Check your iPhone switch mode (Ring/ Silent)
  2. When your iPhone is in vibrate mode, you will see orange on this switch
  3. Switch to the Ring mode

Fix 7: Enable Phone Noise Cancellationnoise-cancellation

  1. Go to settings
  2. Tap to General menu
  3. Tap to Accessibility
  4. Enable Noise Cancellation

Fix 8: Audio Call Routingaudio-call-routing

  1. Go to Settings option
  2. Tap to General menu
  3. Tap to Accessibility
  4. Tap to Audio Call Routing
  5. Change It to Automatic

Do you think this article is useful..? If yes, share your experience with me through your comments.

10:37 am

Leave a Reply